www.lineartools.co.uk
6
150mmMetricVernier WithSet LockingScrew
150mmVernierCaliper WithThumbLock
WhiteFace DialCalipers
PDF 1246 CLICK FOR
• Precision calipers for accuracy in a wide range of measuring applications • Fully hardened stainless steel constructionwith an anti-glare, satin chrome finish • All measuring surfaces are ground and lapped for high accuracy • 4 basic measuring methods: inside, outside, depth and step • Measurement range: 150 mm
• Precision calipers for accuracy in a wide range of measuring applications • Fully hardened stainless steel constructionwith an anti-glare, satin chrome finish • All measuring surfaces are ground and lapped for high accuracy • 4 basic measuring methods: inside, outside, depth and step • Thumb lock • Measurement range: 150 mm
• Hardened stainless steel body • Four-way measurement for outside, inside, depth and step • Graduations: Metric: 0.02mm Inch: 0.001”
Order Code
Description/ Size
List Price
Offer Price
• Graduation: .05mm • Jaw depth: 40 mm • Hardened stainless steel • Matt-chrome vernier and scale • With set locking screw
• Graduation: .05mm • Jaw depth: 40 mm • Hardened stainless steel • Matt-chrome vernier and scale
100mm 150mm 200mm 300mm
£35.80 £61.60 £74.60 £104.00 £35.80 £61.60 £74.60 £104.00
51-200-100 51-200-150 51-200-200 51-200-300 51-200-004 51-200-006 51-200-008 51-200-012
£24.95 £43.10 £52.20 £72.80 £24.95 £43.10 £52.20 £72.80
Order Code 51-102-206
Description/Size 150mm
Order Code 51-102-306
Description/Size 150mm
4” 6” 8” 12”
List Price £22.90
List Price £24.20
Offer Price £15.95
Offer Price £16.95
VERNIER CALIPER 0-24"Master VernierCaliper
Metric&Imperial - Inspection&WorkshopGrades GAUGE BLOCK SETS
ElectronicDigitalCaliper FREE
• Micro-fine graduations • Jaw depths: 3” • Dual reading: Inch grads. = 0.001”, Metric grads. = 0.02mm • Minimum internal measurement:10mm
FREE 150mm/6” Electronic Digital Caliper with every Gauge Block Set purchased
Order Code 51-115-024
Description/Size Master Vernier 24”
List Price £156.00
Offer Price £101.00
CarbonFibre DialCaliper
• Manufactured from specially selected high quality age hardened alloy steel • Each block is heat treated to HRC65/HV820 for high resistance to wear • High quality surface finish • Available in 2 grades: Inspection & Workshop
PDF 1227 CLICK FOR
• Each set is supplied with a 5 point UKAS Certificate of accuracy • Steel gauges must be cleaned after use to avoid corrosion • Sets are supplied in high quality fitted wooden box Metric Gauge Blocks: BS EN ISO 3650:1999 Order Code Set Pieces BS Grade
List Price £466.00 £688.00 £584.00 £920.00 List Price £436.00 £612.00 £522.00 £810.00
Offer Price
£419.00 £619.00 £525.00 £828.00
47 87 47 87
WKS 2 WKS 2 INSP 1 INSP 1
53-670-047 53-670-087 53-671-047 53-671-087
• Manufactured from Carbon Fibre • Range: 0-150mm • Graduations: 0.1mm • Travel per rev: 10mm • Caliper Beam marked in 10mm steps • Convenient Thumb Adjuster • Rotating Dial Bezel
PDF 1099 CLICK FOR
Imperial Gauge Blocks: BS 4311:Part 1:2007 Order Code Set Pieces
BS Grade
Offer Price
£392.00 £550.00 £470.00 £729.00
36 81 36 81
WKS 2 WKS 2 INSP 1 INSP 1
53-670-036 53-670-081 53-671-036 53-671-081
Order Code 51-220-150
Description/Size 0-150mm
List Price £12.20
Offer Price £8.20
Made with FlippingBook Annual report maker