SIZING MADE EASY
WATCH OUR HOW TO MEASURE VIDEO AT WWW.TEAMLEADER.COM/MEASURE
There are 2 ways to size your team: Measure each athlete or use our Sizing Kit. Both methods can be accurate and easy with some basic guidelines. First, have all athletes wear similar attire for fast measuring or fast fitting of uniform pieces. It is always best to have one person in charge of measuring or approving fit of samples so all uniforms will look similar in overall fit. If parents are at fitting, make sure they agree with size being ordered. A sign off sheet approving sizing is helpful so parents understand that uniforms are custom made and non-returnable. Remember, you may be ordering for growing athletes. Take into consideration when selecting sizes. Keep in mind that some uniforms may require alterations after delivery depending on individual body types. Alterations will be the responsibility of the individual. In an effort to make your sizing experience easy and as effortless as possible, TeamLeader offers you some guidelines and helpful hints to assist you with the sizing process. Polyester Shells: Use chest measurement and BWL (back waist length) as a guide for size. For a fitted look, follow size chart exactly. If a loose fit is desired, move up one size. Most polyester shells have 1” side seam which allows shells to be enlarged up to 3”. If design has side insets and/or side braid it will not have side seam allowance. All shells come in Youth and Adult sizes. Review differences in youth & adult shells so you can determine best size
for your team. Youth shells are fuller through the waist and have smaller arm holes. Adult shells have bust darts and are tapered at the waist for a slimmer look. Most Adult shells are 1" longer back waist length than youth shells. We can add up to 2" from standard back waist length at no additional charge. Add $10.00 - $20.00 for longer lengths. For special larger size shells, add $25.00 per shell. If using sizing samples, each garment is marked with Size & Back Waist Length. For youth garment, the size is listed (YM) and BWL (16). If this is desired size you’ll mark YM/16. If you want 2" longer then you would order YM/18. If measuring, Back Waist Length is measured from the base of the neck to the desired length. Normally 1-2" past waistline. Chest Measurement is measured with relaxed arms at sides. Measure around the fullest part of the chest. We recommend Back Waist Length being measured past skirt waistband. Polyester Skirts: TeamLeader offers a variety of skirt styles. The fit of the skirt style varies on each body type. Use the catalog as a guide to determine best skirt style for your team members. Begin by using the waist measurement to determine skirt size, then find the closest hip measurement. Most polyester skirts have 1” side seam allowance which allows skirts to be enlarged up to 3”. Knife Pleat, eight Panel, flyaway, gladiator skirts along with skirts with side insets, do not have a side seam allowance. Skirt lengths can be made 2"
longer than standard length for no additional charge. For other skirt lengths, add $5.00. If no specific skirt length is requested, skirts will be manufactured with our standard skirt length which varies by size. Refer to size chart for standard lengths. All polyester skirts have a 2 button waistband for a great fit. Buttons are easy to move for growing athletes. All skirts are available in Youth and Adult sizes. Youth skirts are slimmer through the hip area and Adult skirts are fuller. For skirts larger than our size chart, add $25.00 per skirt. If using sizing samples, each garment is marked with Size & Length. For youth skirt, the size is listed (YM) and length (13). If this is desired size, you’ll mark down YM/13. If you want to subtract 2", you would order YM/11. If measuring team members, skirt length is measured under the 1” waistband over the rear and downward to desired length. To measure the waist, measure around the smallest area of the natural waistline. You may need to remind girls where their waist is since many garments are worn at hips normally. Measure hips at the fullest area. Bodyliner/Uniliner: Bodyliners/Uniliners are tight fitting garments. It is normal to feel tightness in the arm. Bodyliners/Uniliners are available in lightweight, TeamFlex performance fabric. Be sure to select a bodyliner that compliments your shell design. TeamLeader cannot guarantee that bodyliners with arm designs will match up on every body type. All
bodyliners/uniliners are available in youth & adult sizes. Youth sizes have shorter crop back waist length and sleeve lengths. If a looser fit is desired, move up 1 size. If using sizing samples, size is clearly marked on samples. If measuring, use the chest measurement, crop back waist length and center back sleeve length to determine size. To measure center back sleeve, start at base of neck down arm to desired length. TeamFlex Shells/Skirts: TeamFlex garments are tight fitting garments. These are recommended for athletes that will feel comfortable in tight fitting garments. TeamFlex shells and skirts do not have side seam allowance so size up for growing athletes. Length can be added to tops and skirts as needed. Warm-Ups: TeamLeader offers custom made warm-ups and quick delivery stock styles. Many styles are available in youth & adult sizes. Because sizes vary by manufacturer, it is important to not only measure your team members accurately but it is equally important to use the correct size chart. Warm-ups are non- returnable and/or exchangeable so correct sizing is imperative. Keep in mind that some warm-up styles are unisex fit, meaning they are a larger cut than ladies styles. If you are unsure of sizes, order sizing samples or a few sizes in colors you desire for your team and use these as a guide for sizing. All warm-ups
are sold as separates. Jackets and pants can be ordered in different sizes. If using sizing samples, refer to size marked. Custom made warm-ups can have length added to inseams of pants. Specify inseam length if longer pant is desired. However, stock and fleece styles have standard length only. If measuring, use chest measurement for jacket. For pants, use waist & inseam measurement to determine size. Measure inseam along the highest inside part of the leg line to desired length. For special inseam measurements, add $5.00 per pant. Brushed TeamFlex™ may feel tighter, so move up a size if a looser fit is desired. Other: For sizing information on other products, please call your TeamLeader sales representative. As with any standard sized garment, some alterations may be necessary for proper fit. TeamLeader does not alter uniforms. If using TeamLeader sizing samples, please note that there may be small variances in size due to design and braid placement. If in doubt, order a size larger. With manufactured uniforms, 1/2" tolerance is allowable on all garments.
ABOUT TEAMLEADER SIZING KITS: Sizing samples are available for Team fittings if reserved 1-4 weeks before fitting date. Sample reservations will be accepted based on availability. All samples require a deposit payment determined by samples requested. Samples must be returned within 2 weeks for credit towards your team order. TeamLeader includes a return shipping label for samples to be returned easily. Why are Sizing Samples a great option for most teams? • You keep samples for 14 days. If athletes are unable to attend fitting, you have samples for several days to get every athlete fit in sizing samples. • Shipping labels are provided for you to return shipment when sizing is complete. • Our samples are measured for accuracy throughout the year. • Your athletes determine the best fit by trying on several size and length options. • You fit your athletes when you are ready. You decide best fitting time. READY TO ORDER A TEAMLEADER SIZING KIT, OR JUST HAVE QUESTIONS? TEAMLEADER SALES REPS ARE HERE TO HELP! WWW.TEAMLEADER.COM/REP
WE HIGHLY RECOMMEND THAT YOU ORDER OUR SIZING KIT TO ENSURE DESIRED FIT FOR UNIFORMS.
BUST
WAIST
Waistband not included in polyester skirt length. Waistband is included in TeamFlex skirt length.
HIPS
WAISTBAND (not included in skirt length)
MADE IN THE USA: At TeamLeader, we proudly manufacture all Uniforms, Custom Practice Wear and Custom Warm-Ups in the USA. We provide exceptional
quality, unparalleled customer service and delivery that you can count on. Creating and maintaining jobs in the USA, with products that offer a superior quality with a focus on form, fit and function is the core philosophy of our business.
176
Made with FlippingBook Learn more on our blog