ROBOTS
Robot Smart Robot Car Uno R3 VR0007
Smart Robot Car Uno R3 is an intelligent robot used for educa- tional purposes. The STEAM set was designed for beginners who are just starting their adventure with programming, electronics and robotics. Inside, there are 24 different modules, for example: obstacle avoidance, line tracing module, infrared remote control. The robot can be controlled via mobile devices with Android or IOS systems. Smart Robot Car Uno R3 is easy to assemble. A CD guide included in the set contains all necessary instructions on how to build the robot. The kit consists of: • 1 x UNO R3, 1 x USB cable, 1 x V5.0 extension board, 1 x L298N motor driver board, 1 x ultrasonic Sensor, 1 x ultrasonic holder, 1 x servo motor, 1 x Bluetooth module, 1 x IR receiver module, 1 x remote, 1 x charger, 1 x cell box, 1 x CD guide • 4 x motor, 4 x wheels, 4 x aluminium blocks, • 8 x screws, 38 x nuts, 6 x copper column, 6 x copper screws • 20 x Dupont wires • 3 x line tracing module • 2 x acrylics plates
REWORK SOLDERING STATION
Hot-Air Rework Station NA0079
• Output power: 700W +/- 10%, • Temperature range: 100 ~ 480°C, • Gas flow rate: 120L/min (max.), • Temp. stability: +/- 2°C (static). • Soldering iron: • Rated voltage: AC: 26V +/- 10% 50Hz, • Output power: 40W +/- 10%, • Temperature range: 200 ~ 480°C, • Temp. stability: +/- 2°C (static), • Tip to ground resistance: <2 ohm, • Tip to ground potential: <2mV.
2-in-1 Hot Air Rework Station with an LED display. This compact in size rework station combines a hot air gun with a soldering iron which makes it perfect for maintenance and production works. The device is equipped with a precise temperature control, a PID regulator controlled by a microprocessor as well as clo- sed-loop sensors. The high-power hot air gun has a high air flow, and it heats up rapidly. Thanks to these features, it can be used for lead-free soldering. The low-voltage he- ating element of the soldering station is ideal for working with sensitive components. Additionally, the 2-in-1 Hot Air Rework Station has an au- tomatic alarm function and an effective fault detection system. Product specifications:
Robot Smart Robot Car 4WD VR0008 Robot Smart Car 4WD is an in- telligent robot-car which can han- dle rough conditions on the road or even drive on slopes. Modern solutions used to design the robot make it solid and the Arduino Uno
programable processor gives an opportunity to begin an adven- ture with programming, robotics, algorithmics or logic. The set includes: • Robot Smart Car 4WD Kit UNO R3 for Arduino; Line Tracing Module • Ultrasonic Module • HC-05 Bluetooth Module.
• Rated voltage: AC: 220V +/- 10% 50Hz, • Output power: 750W +/- 10% (max.), • Working environment: 0-40°C, • Relative humidity <80%, • Storing temperature: -20-80°C. • Hot air gun: • Rated voltage: AC: 220V +/- 10% 50Hz,
export@nowaszkola.com @
www.nowaszkola.com
30
Made with FlippingBook Proposal Creator