2. Attach eye hooks
Torque Arm Set-Up for LTS-15, LTS 1. Place the arm column base (C) on a perfectly horizontal working surface and bolt it down with four M6 screws and washers. 2. Slide the linear arm kit (A) onto the arm column and attach with hardware provided in box. 3. Attach the tool balancers (B) at the top of the arm column. Then, connect the tool balancer to the eye hook(s) on the linear arm kit (A). 15, LTS-25 and LTS-40 ) on a perfectly horizontal working surface and bolt it down with four M6 screws ) onto the arm column and attach with hardware provided in box. ) at the top of the arm column. Then, connect the tool balancer to the eye hook(s)
Video Support Guide: view torque
view torque set-up video guide
3
1
2
LTS-15, LTS-25 & LTS-40 4 x M6 + washers
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
3
Made with FlippingBook Ebook Creator