Torque Arm Set-Up for LTS-80 1. Place the arm column base (C) on a perfectly horizontal working surface and bolt it down with four M6 screws and washers. 2. Slide the articulated arm kit (A) onto the arm column and attach with hardware provided in box. 3. Attach the tool balancers (B) at the top of the arm column. Then, connect the tool balancer to the eye hook(s on the articulated arm kit (A). ) on a perfectly horizontal working surface and bolt it down with four M6 screws ) onto the arm column and attach with hardware provided in box. ) at the top of the arm column. Then, connect the tool balancer to the eye hook(s ) at the top of the arm column. Then, connect the tool balancer to the eye hook(s)
3
1
2
LTS-80 4 x M8+ washers
Insert Power Tool in Tool Clamp 1. Loosen the two screws on the tool clamp.
2. Position the electric or air screwdriver vertically in the tool clamp. 3. Tighten the two screws until the power tool is clamped securely.
Tool Clamp
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
5
Made with FlippingBook Ebook Creator