3. 3. Attach eye hooks
2. Attach hardware articulated arm
Torque Arm Set-Up for ATS-80 1. Place the arm column base (C) on a perfectly horizontal working surface and bolt it down with four M6 screws and washers. 2. Slide the articulated arm kit (A) onto the arm column and attach with hardware provided in box. 3. Attach the tool balancers (B) at the top of the arm column. Then, connect the tool balancer to the e on the articulated arm kit (A). ) onto the arm column and attach with hardware provided in box. ) at the top of the arm column. Then, connect the tool balancer to the e ) at the top of the arm column. Then, connect the tool balancer to the eye hook(s) ) on a perfectly horizontal working surface and bolt it down with four M6 screws
3
1
2
ATS-80 4 x M8+ washers
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
4
Made with FlippingBook flipbook maker