Insert Power Tool in Tool Clamp 1. Loosen the two screws on the tool clamp. 2. Position the electric or air screwdriver vertically in the tool clamp. 3. Tighten the two screws until the power tool 3. Tighten the two screws until the power tool is clamped securely.
Tool Clamp
Tool Clamp Orientation Change
The clamp position can be changed. Remove and insert the screw and adjust the orientation and re screw. The clamp position can be changed. Remove and insert the screw and adjust the orientation and re-insert the
Screw
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
5
Made with FlippingBook Annual report maker