The Mountz telescoping torque arms are designed to absorb torque reaction forces applied in the direction of the arm axis. It improves process control by preventing cross threading and sideload occurrences by keeping the power tool perpendicular alignment.
CTA-SERIES MOUNTZ TELESCOPING CARBON TORQUE ARM QUICK REFERENCE GUIDE
The Mountz ergonomic arm is used with electric and pneumatic screwdrivers for fastening applications. What’s in the Box : The Mountz torque arm is packaged with two components that need to be assembled. The chart references the the label ID for each arm component within the packaging. A) Telescoping Arm
TOOL CLAMP LABEL
TOOL CLAMP LABEL
TORQUE ARMS
TELESCOPING ARM LABEL
TORQUE ARMS
TELESCOPING ARM LABEL
CTA-15-1000
CTA-150-1500
A9
D1
A19
D3
D) Tool Clamp
CTA-15-1500
A10
D1
CTA-150-2000
A20
D3
CTA-15-2000
A11
D1
CTA-150-2500
A21
D3
TOOL CLAMP LABEL
TOOL CLAMP LABEL
TOOL CLAMP LABEL
TORQUE ARMS
TELESCOPING ARM LABEL
TORQUE ARMS
TELESCOPING ARM LABEL
TORQUE ARMS
TELESCOPING ARM LABEL
CTA-220-1500
A22
D3
CTA-80-1500
A16
D2
CTA-40-1000
A12
D2
CTA-220-2000
A23
D3
CTA-80-2000
A17
D2
CTA-40-1500
A13
D2
CTA-220-2500
A24
D3
CTA-80-2500
A18
D2
CTA-40-2000
A14
D2
CTA-40-2500
A15
D2
Tool Clamp Assembly 1. Attach the tool clamp (D) to the front base of the (A) telescoping arm. Insert Power Tool in Tool Clamp 1. Loosen the two screws on the tool clamp (D). 2. Position the electric or air screwdriver vertically in the tool clamp. 3. Tighten the two screws until the power tool is clamped securely. Torque Arm Set-Up 1. Install the mounting adapter on a standard rail, wall, work bench. Rail carriage and adapter sold separately. 2. Place tool balancer above work station and attach it to the power tool.
1
2
TOOL CLAMP
TOOL BALANCER
Note: It is recommended to use a tool balancer with a telescoping torque arm.
Scan for Manual
Scan for Warranty & Returns Policy
Mountz Support North America: + 1.408.850.9978 International: + 44.1428.741756 mountztorque.com
Engineered in the Silicon Valley Since 1965
SERIE CTA BRAZO TELESCÓPICO DE CARBONO MOUNTZ GUÍA RÁPIDA
Los brazos de reacción ergonómicos de Mountz son utilizados con herramientas eléctricas y neumáticas para aplicaciones de atornillado. Lo que hay dentro : Los brazos de reacción de Mountz se entregan con dos componentes que deben ensamblarse. La tabla muestra laidentificación de la etiqueta de cada componente del brazo dentro del paquete A) Brazo de reacción
ETIQUETA DEL BRAZO TELESCÓPICO
ETIQUETA DEL SOPORTE
ETIQUETA DEL BRAZO TELESCÓPICO
ETIQUETA DEL SOPORTE
BRAZOS DEREACCIÓN
BRAZOS DEREACCIÓN
CTA-15-1000
CTA-150-1500
A9
D1
A19
D3
CTA-15-1500
A10
D1
CTA-150-2000
A20
D3
D) Soporte de la herramienta
CTA-15-2000
A11
D1
CTA-150-2500
A21
D3
ETIQUETA DEL BRAZO TELESCÓPICO
ETIQUETA DEL SOPORTE
ETIQUETA DEL BRAZO TELESCÓPICO
ETIQUETA DEL SOPORTE
ETIQUETA DEL BRAZO TELESCÓPICO
ETIQUETA DEL SOPORTE
BRAZOS DEREACCIÓN
BRAZOS DEREACCIÓN
BRAZOS DEREACCIÓN
CTA-40-1000
CTA-80-1500
CTA-220-1500
A12
D2
A16
D2
A22
D3
CTA-40-1500
CTA-80-2000
CTA-220-2000
A13
D2
A17
D2
A23
D3
CTA-40-2000
CTA-80-2500
CTA-220-2500
A14
D2
A18
D2
A24
D3
CTA-40-2500
A15
D2
Instalación del soporte 1. Coloca el soporte (D)a la base frontal del brazotelescópico (A).
Inserta la herramienta en el soporte 1. Afloja los dos tornillos de la abrazadera del soporte (D). 2. Coloca la herramienta verticalmente en la abrazadera delsoporte. 3. Ajusta los dos tornillos hasta que la herramienta quedebien sujeta. Instalación del brazo de reacción 1. Instala el adaptador de montaje a un riel estándar,una pared o un banco de trabajo. El carro del riel y el adaptador se venden por separado. 2. Coloca el balancín sobre la estación de trabajo y conéctalo a la herramienta.
1
2
SOPORTE
BALANCÍN
Nota: Se recomienda usar un balancíncon un brazo telescópico It
Escanea para ver el manual
Escanea para ver política de garantía
Soporte Mountz Norte América: + 1.408.850.9978 Internacional: + 44.1428.741756 mountztorque.com
Diseñados en Silicon Valley desde 1965
Page 1 Page 2Made with FlippingBook - Online catalogs