The Mountz telescoping torque arms are designed to absorb torque reaction forces applied in the direction of the arm axis. It improves process control by preventing cross threading and sideload occurrences by keeping the power tool perpendicular alignment.
ATS-SERIES MOUNTZ ARTICULATED TORQUE ARM QUICK REFERENCE GUIDE (ITEM # 509340)
The Mountz ergonomic arm is used with electric and pneumatic screwdrivers for fastening applications. What’s in the Box : The Mountz torque arm is packaged with three components that need to be assembled. The chart references the label ID for each arm component within the packaging. A) Articulated arm kit B) Tool Balancer(s) C) Arm column (pole) TORQUE ARMS ATS-15 ATS-25 ATS-40 ATS-80 Arm Column (Pole) Box C1 C2 C3 C4
Articulated Arm Kit Box
A1
A2
A3
A4
Tool balancers Box
B1
B2
B3
B4
A
C
B
Note: Each Mountz ATS model includes tool balancers that are considered for the application of that particular model. The ATS-15, ATS-25 and ATS-80 use 2 balancers while the ATS-40 uses 1 medium sized balancer optimized for tools in the 40 N.m range.
Insert Power Tool in Tool Clamp 1. Loosen the two screws on the tool clamp. 2. Position the electric or air screwdriver vertically in the tool clamp. 3. Tighten the two screws until the power tool is clamped securely. Arm Inclination Change The ATS 25, ATS-40 and ATS-80 models have 3 angle settings to help accommodate larger tools. 1. Remove and insert the screw into the arm’s inclination hole setting. Torque Arm Set-Up 1. Place the arm column base (C) on a perfectly horizontal working surface and bolt it down with four M6 screws and washers. (M8 screws for the ATS-80 model) 2. Slide the articulated arm kit (A) onto the arm column and attach with hardware provided in box. 3. Attach included eye hooks onto the arm support slider. Attach the tool balancers (B) at the top of the arm column. Then, connect the tool balancer to the eye hook(s) on the linear arm kit (A). 4. Refer to the manual for instructions on how to adjust the tool balancers.
3
2
1
TOOL CLAMP
0˚
45˚
22.5˚
22.5˚
0˚
45˚
Scan for Manual
Scan for Warranty & Returns Policy
Mountz Support North America: + 1.408.850.9978 International: + 44.1428.741756 mountztorque.com
Engineered in the Silicon Valley Since 1965
Copyright © 2025 Mountz Inc. All Rights Reserved. V1/060125
SERIE ATS BRAZOS DE REACCIÓN ARTICULADOS MOUNTZ GUÍA RÁPIDA
Los brazos de reacción ergonómicos de Mountz son utilizados con herramientas eléctricas y neumáticas para aplicaciones de atornillado. Lo que hay dentro : Los brazos de reacción de Mountz se entregan con dos componentes que deben ensamblarse. La tabla muestra la identificación de la etiqueta de cada componente del brazo dentro del paquete. A) Brazo de reacción B) Balancín (es) C) Columna del brazo (tubo) BRAZOS DE REACCIÓN ATS-15 ATS-25 ATS-40 ATS-80
Caja Columna (tubo)
C1
C2
C3
C4
Caja brazo de reacción
A1
A2
A3
A4
Caja balancín
B1
B2
B3
B4
A
B
C
Nota: Cada modelo Mountz LTS incluye balancines de herramientas diseñados para su aplicación. Los modelos ATS-15, ATS-25 y ATS-80 utilizan dos balancines, mientras que el ATS-40 utiliza un balancín de tamaño mediano optimizado para herramientas enel rango de 40 N.m.
Instala la herramienta en el soporte Diseñados 1. Afloja los dos tornillos de la abrazadera del soporte. 2. Coloca la herramienta verticalmente en la abrazadera delsoporte. 3. Ajusta los dos tornillos hasta que la herramienta quedebien sujeta. Ajuste de inclinación del brazo Los modelos ATS 25, ATS-40 y ATS-80 cuentan con 3 ajustesde ángulo para facilitar el uso de herramientas más grandes. 1. Retire e inserte el tornillo en el orificio de inclinación delbrazo. Instalación del brazo de reacción 1. Coloca la base de la columna del brazo (C) en unasuperficie de trabajo horizontal y fijala con cuatro tornillos M6 y sus rondanas. (Tornillos M8 para el modelo ATS-80) 2. D esliza el brazo dentro de la columna y fijalo con las piezasincluidas en la caja. 3. Coloca los ganchos incluidos al soporte deslizante del brazo. Coloca los balancines (B) a la parte superior de la columnadel brazo. Después, conecta el balancín a los ganchos en elbrazo (A). 4. Revisa el manual para conocer las instrucciones sobrecomo ajustar los balancines.
3
1
2
SOPORTE
0˚
45˚
22.5˚
22.5˚
0˚
45˚
Escanea para ver el manual
Escanea para ver política de garantía y
Soporte Mountz Norte América: + 1.408.850.9978 Internacional: + 44.1428.741756 mountztorque.com
Diseñados en Silicon Valley desde 1965 Copyright © 2025 Mountz Inc. Todos los derechos reservados V1/060125
Page 1 Page 2Made with FlippingBook - Online catalogs