Accessories
Typical Installation 1 Unloader 2 Regulator 3 Pop-Off Valve 4 Relief Valve 5 Pressure Gauge 6 Pulsation Dampener* 7 Inlet Filter 8 Inlet Pressure Regulator
4
Relief Valve
9 Inlet Stabilizer 10 Thermal Valve 11 Oil Gauge/Drain Kit 12 Easy Start Valve
6
11
5
2
1
17
Regulator
12
16
3
13
15
18
8
7
14
LPS Monitor
10
13 Throttle Controller 14 LPS Monitor 15 Bypass Hose 16 Shaft Protector 17 Oil Cap Protector 18 Rails
9
Inlet Stabilizer
NOTE: These illustrations show the basic elements for a typical installation of a high-pressure piston or plunger pump. Not all components shown are required for all applications or systems. Proper system installation, routine lubrication, monitoring and maintenance of components are basic guarantees of optimum pump performance. Cat Pumps does not assume any liability or responsibility for the design or operation of a customer’s high-pressure system. *Preferred mounting of the pulsation dampener is directly on the discharge manifold of the pump. Systems using a pressure unloader require the pulsation dampener installed down stream when the bypass is returned to the inlet of the pump and an inlet pressure regulator or check valve is used.
For more information, contact us at (763)780-5440 | info@catpumps.com | www.catpumps.com
Pumps & Accessories Catalog 2024
23
Made with FlippingBook - Online Brochure Maker