Fittings for HPLC And UHPLC These innovative fittings solve all of the difficulties of cumbersome LC plumbing issues. Forget cutting old fittings off your SS tubing. Throw away your spanners, make column changes in seconds.
Pressure rated up to 25,000 psi (1,720 bar)
Patent pending innovative design
Capable of up to ten repeat assembly cycles with no impact on pressure holding ability or carry-over;
Available in multiple threaded configurations for use with 1/16 in (1.6 mm) and 1/32 in (0.79 mm) OD tubing
Materials of construction: Stainless Steel and Proprietary PEEK™ polymer blend (PK)
Shimadzu introduces an innovative line of UHP & VHP fittings, designed to withstand extreme pressures. This patent-pending line of ground-breaking fitting systems is perfect for use within the increasingly demanding requirements of today’s high performance analytical systems. The fittings are reusable when following the proper tightening torque specification. With a polymer front ferrule, there is no damage to the tubing or receiving port, also increasing the life of these components.
Can be reused (re swaged)
Spanner tightened
Tubing used on
One or two piece system
Type of Fitting
Picture
Pressure rating
Suitable for
Ultra-High Pressure Fitting. Stainless
Steel nut with patented PEEK polymer blend ferrule.
Yes 8mm hex spanner
All high pressure 1/16” S/S fittings up to 25,000 psi.
Separate nut and “captured” ferrule.
25,000 psi / 1,720 bar
Yes
S/S
226-50100-02 (2pcs) 226-50100-10 (10pcs) Ultra-High Pressure Fitting Long bodied version
Yes 8mm hex spanner
Particularly suitable for LC injection ports.
Separate nut and “captured” ferrule.
of one above for injection valves.
25,000 psi / 1,720 bar
Yes
S/S
226-50101-02 (2pcs) 226-50101-10 (10pcs) Ultra-High Pressure Fitting With fingertight head and integrated ferule, 10-32 thread.
All fittings up to 25,000 psi.
Two piece- S/S nut and “captured” PEEK polymer blend ferrule.
Good fitting especially for
25,000 psi / 1,720 bar
Finger tightened.
S/S and PEEK
Yes
changing columns- fast and reusable with no spanners.
226-50104-02 (2pcs) 226-50104-10 (10pcs)
Finger 1 – Peek One piece, cone tip, 10-32 thread.
All fittings up to 12,000 psi. Good fitting for when you are in a hurry.
Finger tightened with handheld tightening tool.
12,000 psi / 827 bar
S/S and PEEK
Single piece PEEK
Yes
226-50106-02 (2pcs) 226-50106-10 (10pcs)
Pg A-124
Made with FlippingBook Digital Proposal Creator