Be careful when removing the oil reservoir filling screw because there will still be air pressure in the oil tank!
Hold the screw (listed as part 1 in the drawing below) and slowly loosen it to let the air escape before removing it completely. Or you can carefully disconnect the air hose next to the filling screw (listed as part 2 in the drawing below) until no more air escapes and reconnect afterwards, as this will have the same effect.
2
1
If the oil level is low, you should refill to a few centimeters below the top of the reservoir and close it.
Repeat the filling procedure until the roof goes up completely.
21
Made with FlippingBook - PDF hosting