I NSTALLATION
The BRAHM ™ Collector Plug and Play Series require some minor assembly.
A standard unit will come with an exhaust cover pre-installed.
A standard unit will come with electrical panel pre-installed.
In some instances, filters may be shipped separate from the unit, requiring installation on site.
See the 'BRAHM ™ Collector Accessories User Manual' for accessory assembly instructions.
General Installation Guidelines
Clean Air Industries BRAHM ™ Collectors are shipped via freight and generally arrive on a flat bed trailer or
box trailer. The units are typically palletized. Use a fork
lift truck driven by a qualified individual, to remove the unit
and other pallets from the truck. Occasionally, fork
extensions are helpful.
Once the unit is inside the facility, ready to be unpackaged,
please proceed cautiously. Banding straps, cardboard, and
plastic wrap must be removed.
BRAHM ™ Collectors are heavy and tend to be irregularly
weighted. The motor and the majority of the metal are
located on the motor / valve side of the unit. This can make
transporting the units hard to handle. Please see the "Unit
Weight" section for proper weights.
Unlike the regular BC Series, the BC Plug and Play Series
only come as a single module unit and comes standard with
36 ” stand.
There are (4) steel plate eyelets vertical on the top of unit or section. These are the lifting lugs, and
can be used for moving the unit around.
The unit needs to be placed on the stand. The 4 feet of the unit must be bolted to the stand to secure
the unit to the stand
Page 11
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook Annual report maker