W ARNINGS AND L ABELS
HIGH VOLTAGE: The voltage of the BRAHM ™ Collector is
dangerous once connected to a power supply. Incorrect
installation may cause damage to the equipment, serious
injury, or death. Consequently, it is essential to comply with
instructions in this manual, local and national safety rules, and
follow all safety procedures including proper lock out and tag
out procedures.
ELECTRICAL SHOCK HAZARD: The Variable Frequency
Drive (VFD) uses large capacitors which can hold a charge
long after the power has been disconnected from the unit. Do
not service the panel until the VFD has fully discharged.
GROUND CONNECTION: Proper grounding of the equipment
and electrical panel is essential. Do not attempt to operate the
equipment without electrically grounding the panel. The
connection to the earth ground must be proper and provide a
low impedance path to the earth to prevent hazardous
voltages from appearing on equipment.
COMPRESSED AIR: Compressed air is used in the operation of
this unit. Follow proper lock out / tag out procedures prior to
servicing the unit. This includes draining the compressed air
reservoir inside the unit. Failing to do so can lead to injury or hearing
loss. Look out – drain tank – do not service while pressurized.
Page 17
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook Annual report maker