Secure the stand to the ground using customer supplied anchor bolts.
There a small ¼” compressed air line that tees off the incoming compressed air line. There is a
compression fitting pre installed on the unit. Simply push the black tubing into the compression fitting. The
fitting will automatically clamp down onto the tubing. The tubing should be preinstalled into the wire track
on top of the unit.
An air regulator is provided. It must be screwed onto the incoming air line to the unit and set to 80-100
psi. 100 psi is recommended.
Page 21
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook Annual report maker