I NSTALLING THE D UST B INS
The dust bins are placed below the filter compartment. BC Plug and Play comes with built-in hopper,
allowing for a more compact setup and lower stand height. A piece of flex hose is affixed to the bottom of
the hopper and connects to the top of the dust bin. As the self-cleaning cycle is activated, dust will be
blown from the filters and accumulate fall into the hoppers. Dust then slides down the hoppers to the slide
gate. When the slide gate is open, the dust slides out of slide gate, through the flex hose and into the dust
bin.
Once the unit is fully assembled and operational, place the
dust bin under the filter compartment.
Slide the included piece of 6" flex hose over top of the pipe
at the bottom of the hopper.
Use the included hose clamp to faster the flex hose to the
bottom of the hopper. Use a screwdriver to tighten the worm
gear on the hose clamp.
Several sizes of dust bins are offered, however, they all
install in a similar fashion.
Page 39
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook Annual report maker