Swing Clamps Position Sensors
n The use of NPN or PNP is determined by the customer for the device to be connected to the sensor. n 0.188” Sensing Range n Kit Consists of Senor and Cable: - 10 to 30V DC sensor for use in sensing position of swing clamp equipped with magnetic piston.
Position Sensing Kit Model Number and Description P6-2297-00 PNP (Normally Open) P6-2297-01 NPN (Normally Closed)
B-5
- Switch-ON time <1.0 ms - Switch-OFF time <0.8 ms
Position Sensor shown attached to swing clamp
- One sensor required for each position to be sensed. - Cable is 196” long and has an M8 x 1 plug connector on one end and bare wires on the other.
LED Indicator Light
Approx. 15.5” Sensor
Approx. 196” Cordset
Model No. P6-2297-01
Model No. P6-2297-00
ILSP29700 Rev B
800-992-0236 © Vektek January 2022
Made with FlippingBook - Online Brochure Maker