Swing Clamps Standard Features
Arms swing 90º. Our capscrew arm design is available. You may modify our arm, or we have provided you with dimensions to make your own. Special wipers and swept-line cylinder tops help keep chips from packing and coolant contaminants from entering the swing clamp. Swing clamp bodies are wrought aluminum alloy with PHC TM (Pneumatic Hardcoat) coating on all external and internal surfaces. This gives the clamps extended life. Plungers are carbon steel with hard chrome plating. The guide bushings are hardened alloy steel. All dynamic seals are internally lubricated and made from a specially compounded elastomer to promote smooth break away and low operational drag. Six bore sizes are available in two mounting styles to best adapt to your application. All models are available in straight pull and left or right swings. Magnetic pistons are standard on all models, allowing you to use position-indicating sensors. Position sensors mount within the clamp’s space envelope so sensor usage doesn’t encroach on the clamp’s mounting envelope. Position sensors have an LED indicator to reduce setup time. All swing clamps have internal orifices to prevent cam damage caused from over accelerating the clamp. VektorAir TM clamps are double acting to reduce mounting envelope and prevent non-return and slow return problems inherent with single acting clamps. To determine whether a straight pull, left or right swing should be specified, imagine D F AA B G E C
Top Flange Threaded Body Swing Clamp
B-2
AG
AF
H
ILSP15002 REV A
Clamp Position Sensor Slot
Bottom Flange Swing Clamp
To
M Clamp Stroke
Str
Unclamp Position Sensor Slot
ILSP15002 REV A
ILSP15201 REV A
Product Clamping Forces
viewing the arm from above during the clamping stroke. Arms moving clockwise are right hand swings, counter-clockwise are left hand swings.
800-992-0236 © Vektek January 2022
ILSP15001 REV D
Made with FlippingBook - Online Brochure Maker