Swing Clamps Bottom Flange Specifications
1/8 NPT RETRACT PORT AG
G F
“M” CLAMPING STROKE
X
RETRACTED SWITCH GROOVE
W J
AE
“N” TOTAL STROKE
S
AC
R
Ø A
P
Q
B-4
L°
Y
Ø H
POSITION SWITCH GROOVES
1/8 NPT EXTEND PORT
Ø K THRU (4X)
V
AF EXTENDED SWITCH GROOVE
AD
Z
AB
E
T
D
C
ILSP15200 REV F
AA
B
Swing Direction
Bottom Flange Swing Clamp Model Numbers
RIGHT HAND LEFT HAND STRAIGHT
P1-5041-00 P1-5047-00 P1-5049-00
P1-5071-00 P1-5077-00 P1-5079-00
P1-5111-00 P1-5117-00 P1-5119-00
P1-5141-00 P1-5147-00 P1-5149-00
P1-5201-00 P1-5207-00 P1-5209-00
P1-5241-00 P1-5247-00 P1-5249-00
Bore
0.500
0.875
1.125
1.500
2.000
2.500
Ø A
1.19 4.86 4.36 3.67 3.59 0.84 0.56 0.25
1.56 5.48 4.79 3.97 3.91 0.91 0.56 0.50
1.81 5.48 4.79 3.97 3.91 0.91 0.56 0.50
2.25 8.24 7.11 5.61 5.47 0.97 0.62 0.63
2.69 8.24 7.11 5.61 5.47 0.97 0.62 0.63
3.19 8.20 7.07 5.57 5.47 0.97 0.62 0.75
B
C
D E F G
Ø H
J 8-32 x .5 5/16-18 x .5 5/16-18 x .5 3/8-24 x .75 3/8-24 x .75 3/8-24 x .75 Ø K 0.17 0.19 0.19 0.22 0.22 0.28 L° 23 25 25 25 25 25
M RIGHT HAND
0.40 0.40 0.69 0.69 1.44 1.10 0.55 0.94 1.67 0.73
0.47 0.47 0.82 0.82 1.75 1.37 0.69 1.19 2.06 0.87 0.69 1.37 0.88 1.50 5.02 2.19 0.63 0.44
0.47 0.47 0.82 0.82 2.00 1.55 0.78 1.31 2.28 0.97 0.78 1.55 1.00 1.50 5.02 2.19 0.63 0.44
0.75 0.75 1.50 1.50 2.50 1.90 0.95 1.56 2.78 1.22 0.95 1.90 1.25 2.18 7.56 2.99 0.75 0.44
0.75 0.75 1.50 1.50 2.87 2.21 1.10 1.81 3.24 1.43 1.10 2.21 1.44 2.18 7.56 2.99 0.75 0.44
0.75 0.75 1.50 1.50 3.40 2.61 1.30 2.13 3.81 1.68 1.30 2.61 1.70 2.43 7.56 3.31 0.87 0.50
LEFT HAND STRAIGHT
N P Q R S
Bottom Flange Swing Clamp * See graphs on page B-7 for clamp curves and extended arm performance force. It is recommended that the clamp position be set at about 50% of the clamp stroke. These devices should be positioned in no less than 1/2 second. These recommendations apply when using the standard arm. When using the extended or large custom arms, allow 1 second for positioning.
T
V
W 0.55
X Y Z
1.10 0.72 1.13 4.59 1.59 0.38 0.31 8-32 2.12 2.91
AA AB AC AD AE AF AG
1/4 - 20
1/4 - 20
3/8 - 16
3/8 - 16
3/8 - 16
2.37 3.16
2.37 3.16
3.87 4.66
3.87 4.66
3.87 4.66
Effective Piston Area (sq. in.)* - - See * statment far right Extend 0.20 0.60
1.00 0.80
1.77 1.46
3.14 2.83
4.91 4.47
Retract
0.15
0.40
Air Usage (cu. in.) Per complete cycle
0.25
0.80
1.50
5.00
9.00
14.00
800-992-0236 © Vektek January 2022
Made with FlippingBook - Online Brochure Maker