Special Use Clamps
Pull-Down Clamp Jaws
Pull-Down Clamp Jaws Hardened and tempered steel (except smooth jaws). Serrated Jaws can be used for all workpieces with normal clamping force. Smooth Jaws are not hardened and treated and can be shaped into any clamping form or ground flush for sensitive workpieces. Clamping Jaws with clamping edge are well suited for workpieces with hard and very uneven surfaces. Special jaws are available in the configurations illustrated on this page (nominal extra cost). These configurations fit most special applications nearly eliminating the need for high cost, specific application special orders.
E-13
E±.5
E±.5
E±.5
D
D
D
90
H
B
B
B
F
F
20
J
J
20
20
3
A
A
A
G
SMOOTH
C
C
C
SERRATED
ILMV153106 REV C
Specifications
Dimensions ModelNo.A B CD E F G H J 41-5305-01 6 29.5 30 2.5 22 3 N/A N/A 15 41-5320-01 10 50 50 3 31.5 14 N/A N/A 30 41-5332-01 10 65 65 3 37 17.5 N/A N/A 30 41-5350-01 10 80 80 3 39.5 19 N/A N/A 30 41-5305-02 6 29.5 30 2.7 32 N/A N/A N/A N/A 41-5320-02 10 50 50 3 41.5 N/A N/A N/A N/A 41-5332-02 10 65 65 3 52 N/A N/A N/A N/A 41-5350-02 10 80 80 3 59.5 N/A N/A N/A N/A 41-5305-03 6 29.5 30 2.7 27 4 300 5 15 41-5320-03 10 50 50 3 39.5 14 200 8 30 41-5332-03 10 65 65 3 47 17 300 10 30 41-5350-03 10 80 80 3 51 19 300 12 30
Model No.
Description
41-5305-01
SERRATED CLAMP JAW FOR 41-5311-05
41-5320-01
SERRATED CLAMP JAW FOR 41-5311-20, 41-5320-20
41-5332-01
SERRATED CLAMP JAW FOR 41-5311-32
41-5350-01
SERRATED CLAMP JAW FOR 41-5311-50
41-5305-02
SMOOTH CLAMP JAW FOR 41-5311-05
41-5320-02
SMOOTH CLAMP JAW FOR 41-5311-20, 41-5320-20
41-5332-02
SMOOTH CLAMP JAW FOR 41-5311-32
41-5350-02
SMOOTH CLAMP JAW FOR 41-5311-50
41-5305-03 CLAMPING NOSE CLAMP JAW FOR 41-5311-05 41-5320-03 CLAMPING NOSE CLAMP JAW FOR 41-5311-20, 41-5320-20 41-5332-03 CLAMPING NOSE CLAMP JAW FOR 41-5311-32 41-5350-03 CLAMPING NOSE CLAMP JAW FOR 41-5311-50
All dimensions are in mm.
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs