Cylinders
Threaded Mini-Cylinders Specifications
Single Acting Easy to use, basic hydraulic cylinders in G Series ported styles. A force ranging from "minimal" to maximum cylinder capacity is adjusted by tuning the input pressure. Designed for long life in high production applications. Reduce or eliminate part distortion by providing accurate clamping force. Special tough wipers help keep chips and contaminants out of all cylinder sizes. Positive piston stop shoulder keeps the spring from "bottoming out" guarding against premature spring failure, which plague other cylinder brands.
F-2
Each cylinder capacity is available in three stroke lengths, up to 32mm.
ILMV200112 REV D
Specifications
Minimum Length (mm)
Capacity (kN) **
Piston Area (cm 2 )
Oil Capacity (cm 3 )
Body Thread
Model No.
Stroke (mm)
Type
Extend
Extend
Extend
Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned.
42-0010-01 42-0010-10 42-0010-11 42-0010-02 42-0010-12 42-0010-13
9.5
51 67
1.2 2.5 4.1 1.8 5.5 9.2
Threaded
4.4
19 32
M20 x 1.5
1.3
83.5
6.5
56 69
Threaded
10.1
M28 x 1.5
2.9
19 32
86.5
** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying the hydraulic system pressure. To determine approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to friction loss, seal and wiper drag and/or return spring forces.
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs