Miscellaneous Plumbing
Hydraulic Junction Manifolds
4X G1/4 接口
Hydraulic Junction Manifolds Convenient, cost effective connection point for mounting quick connect fittings on fixtures and pallets. Provide a secure interface when connecting between rigid steel tubing and flexible hose. High strength steel, careful attention to detail in design, and extensive testing ensure reliability at working pressures up to 350 bar (35 MPa).
30
4X 18
Single Path Rectangular Manifold
19
38
2X 7 通孔
24
38
Manifold Block Model No. 43-0000-35
7
7 24 ILMV430035 REV B
Two separate flow paths in single manifold simplifies hydraulic connections and reduces the number of components required in double acting systems. Wide spacing between ports allows use with elbow and tee tube fittings. Can be converted to an 8 Port Single Path unit. Dual Path Rectangular Manifold
4X G1/4 per path
I-1
21 3X 30
132
2X 7 Thru
7
118
*To convert to 8 port single path, drill 5 mm minimum, through.
Part No. 43-0000-36 G1/4, 4 Port, Dual Passage, Manifold Block*
ILMV430036 REV B
Dual Passage Manifold Block Model No. 43-0000-36
All VektorFlo ® hoses are intended to operate up to 350 bar (35M Pa) working pressure. Hoses are typically used to feed entire fixtures, medium size hoses are for feeding small fixtures or single devices. Standpipe Connection Hose
Dimensions (mm) Model No. D1 D2 D3 L
Standpipe Connector Hose
Bend Radius
D1
D2
D3
43-0000-37 43-0000-38
500 800
30 min.
8 4.8 9.8
43-0000-39 1250 Maximum Operating Pressure......350 bar Tube...........................................Polyamide Reinforcement.............................Steel Braid Cover..........................................Polyurethane
L
ILMV430037
REV B
www.vektek.com
Outside US+1-913-365-1045
© Vektek December 2021
Made with FlippingBook - Online catalogs