Cylinders
Combination Block Cylinders Specifications
Double Acting with Bottom Manifold and Standard Side Porting Perpendicular mounting in relation to cylinder stroke. Feed cylinder through manifold ports or external plumbing. No special mounting hardware required. Flush top retainer design for close push or pull applications. Available in 5 popular bore sizes with 2 stroke lengths each.
ILMV421100 REV C
F-10
Specifications
Piston Area (cm 2 )
Oil Capacity (cm 3 )
Cylinder Capacity (kN)* Extend Retract
Body Size (mm)
Minimum Length (mm)
Model No.
Stroke (mm)
Extend Retract
Extend Retract
Double Acting (D/A) Cylinders, actuated hydraulically in both directions.
42-1121-00 42-1121-01 42-1121-02 42-1121-03 42-1121-04 42-1121-05 42-1121-06 42-1121-07 42-1121-08 42-1121-09
16 50 20 50 25 50 25 50 25 50
68
4.6
2.5 7.9 6.2
10
5.5
35 x 60
2.9
1.6
102
14.3 10.1 25.3 19.8 39.6 33.5 66.9 50.7
71
17.7
10.8
45 x 65
5.1
3.1
101
15.4 12.7 25.3 20.8 41.6 30.9 61.8
85
27.7
17.7
55 x 75
7.9
5.1
110
89
46.8
29
63 x 85
13.4
8.3
114 100 125
70.9
43.2
75 x 100
20.3
12.4
101.3
* Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying the hydraulic system pressure. To determine approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to friction loss, seal and wiper drag.
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs