Cylinders
Cartridge Mount Mini-Cylinders Specifications
Single Acting Easy to use, basic hydraulic cylinders in four capacities of cartridge mount style. A force ranging from "minimal" to maximum cylinder capacity is adjusted by tuning the input pressure. Reduce or eliminate part distortion by providing accurate clamping force. Cartridge mounting eliminates exposed tubing for clean, compact, clutter-free fixtures.
Special tough wipers help keep chips and contaminants out of all cylinders.
F-14
Positive piston stop shoulder keeps the spring from "bottoming out", guarding against premature spring failure which can plague other cylinder brands. BHC™ (Black Hard Coating) on the cylinder bodies helps prevent scoring and scratching. After years of use, cylinder removal is easier because of BHC’s corrosion resistance. Cartridge models use a gasket to seal against the cavity bottom.
ILMV200117 REV C
Specifications
Maximum Cylinder Force (kN)*
Minimum Length (mm)
Model No.
Stroke (mm)
Body Thread
Piston Area (cm 2 )
Oil Volume (cm 3 )
Single Acting (S/A) Cylinders, actuated hydraulically and spring returned.
42-1010-00 42-1010-01 42-1010-02 42-1010-03 42-1010-04
2.4 4.4
5.2
M16 x 1.5 M20 x 1.5 M28 x 1.5 M28 x 1.5 M35 x 1.5
28 38 35 62
0.7 1.3 2.9 2.9 5.1
0.3 0.8 2.7 5.5 4.0
7
10.1 10.1 17.5
9.5
19
8
37.5
*The Cylinder Forces listed are for cylinders operating at 350 bar (35 MPa), the maximum operating pressure. Cylinder force can be adjusted by changing the hydraulic pressure to the cylinder. To calculate the approximate output force for an application, divide the Maximum Cylinder Force listed by 350 and multiply the result by the predetermined operating pressure. The actual output force will vary slightly due to frictional losses within the cylinder assembly, and return spring forces.
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs