Cylinders
Cartridge Mount Pull
B
D
L
H
J
A
G
F
N
2X Q
C STROKE
K
2X P
M
E THREAD X DEPTH
ILMV421001 REV B
NOTE: Return spring and anti-rotation pins included.
NOTE:FLEXIBLE HONING/ BALL HONING OF CAVITY IS STRONGLY RECOMMENDED.
F-17
Preferred Relief Detail Relief to be within Dimensions C & D
40
G
A .02
3.68 3.17
0.64
C MIN
SEE DETAIL A
D MAX
+0.12 -0.00
B
2X 30
R0.75 MAX
N MIN
DETAIL A
VENT E MAX
4X J THREAD K ON H BOLT CIRCLE
OPTIONAL CYLINDER RETAINING RING
R
4X S THRU
P
M
2X L
F
Q THRU
ILMV421002 REV B
Cavity Dimensions
Model No.*
F **
G **
H **
K **
L ***
M ***
N ***
Cap. (kN)
Bolt Torque
Optional Retainer
A B C D E
J**
P Q R S
Single Acting (S/A) Cylinders, actuated hydraulically and spring returned.
18.3 4.1 36.3 8.0 28.7 M4 X 0.7 6 3.3 11.2 7.9 35.43 12.7 3.18 4.39 3.3 N-m 18.3 4.6 47.2 8.0 39.6 M4 X 0.7 6 3.3 13.5 10.2 46.53 19.1 3.18 4.39 3.3 N-m 21.3 4.6 54.6 10.0 44.5 M6 X 1.0 9 3.3 14.3 10.2 53.98 19.1 3.18 6.53 7.0 N-m 24.6 8.4 71.9 13.5 58.8 M8 X 1.25 12 4.1 22.2 10.2 70.66 25.4 4.75 8.33 16 N-m 21.3 27.7 8.9 86.4 17.0 71.4 M10 X 1.5 15 7.1 25.4 15.2 85.73 28.5 6.35 10.4 35 N-m 31.0 10.2116.6 23.0 96.8 M12 X 1.75 18 7.1 39.9 15.2 115.9 31.8 9.53 13.08 80 N-m
42-1136-00
4.4 20.65 28.45
64-0140-80
42-1139-00 42-1139-01 42-1140-00 42-1140-01 42-1143-00 42-1143-01 42-1146-00
28.45 31.62
8.9 30.18
64-0141-10
13.1 33.35 31.62
64-0141-30
11.2
23.1 44.48 34.80
64-0141-70
40 54.00 37.97
64-0142-10
42-1146-01 42-1151-00 76.1 73.05 41.15
64-0142-80
*
Lubricate O-Rings with grease prior to installation.
**
This cavity uses the optional retaining ring available from Vektek. These features are for use with the retaining ring. These features are only needed if anti-rotation pins are used. Anti-rotation pins and return springs are included with the cylinder.
***
www.vektek.com
Outside US+1-913-365-1045
© Vektek December 2021
Made with FlippingBook - Online catalogs