Vektek Metric Hydraulic Clamping Catalog

Power Supplies

.75 kW Advanced Workholding Pump Decoupled Convenience Packages

200-240 VAC 1 Phase

200-240 VAC 3 Phase

380-500 VAC 3 Phase

No. of Valves

Pallet Decoupler (one hose) S/A

Valve Type: Manual 2-Position 3-Port • Can use coupled or uncoupled

Recommended to run a continuously connected or single hose supply decoupled system Operator interface is by a manual valve handle

1 45-9565-12-1 45-9575-12-1 45-9595-12-1

• •

Pump located within operators reach Valve Type: 24VDC 2-Position 3-Port Normally Closed "Dump Pump" • Single Acting Decoupled Systems

Valve installed with a control pendant to power systems using the Self-closing Decoupler and Tombstone Top Plates Commonly called a "dump pump" and uses a momentary contact pendant switch When preset pressure is reached the control valve automatically shifts and dumps pressure back to tank

1 45-9565-25-1 45-9575-25-1 45-9595-25-1

• Operator interface is by remote pendant or can be wired into a machine controller Valve Type: 24VDC 2-Position 3-Port Normally Closed • Single Acting Live systems

Use with Manual Pallet Decouplers, Tombstone Top Plates and Self-Closing (single hose) Decouplers Operator interface is by remote pendant or can be wired into a machine controller All decoupled valves are de-energized when not in use to avoid heat build-up between cycles.

1 2 4

45-9565-24-1 45-9565-24-2 45-9565-24-4

45-9575-24-1 45-9575-24-2 45-9575-24-4

45-9595-24-1 45-9595-24-2 45-9595-24-4

NOTE:

Pallet Decoupler (two hose) S/A or D/A

J-8

Valve Type: Manual 3-Position 4-Port P-Blocked Center • Double Acting, or Single Acting run live or decoupled

Control Auto-Shutoff Pallet Decoupler (2 hose system) Operator interface is a manual valve handle

1 45-9565-17-1 45-9575-17-1 45-9595-17-1

• •

Best selection for fixture testing, runs most systems Valve Type: 24VDC 3-Position 4-Port P-Blocked Center with A & B Pressure Regulated Individual Circuit Adjustment • Reduces pressure to clamp or unclamp side of a circuit

Use with one or two handed Auto-Shutoff Decoupler

P-blocked center valve drops pressure in both lines. Allows decoupling and re-coupling of the hoses Operator interface is remote pendant or wired into a machine controller

1 45-9565-28-1 45-9575-28-1 45-9595-28-1

• This configuration can also be used to operate two individual single acting systems at different pressures Valve Type: 24VDC 3-Position 4-Port P-Blocked Center • Double or Single Acting Systems

Use 1 or 2 handed Auto-Shutoff Pallet Decoupler Uses a P-Blocked center to drop pressure in both lines to decouple and recouple hoses Operator interface is by remote pendant or can be wired into a machine controller

• •

1 2 4

45-9565-27-1 45-9565-27-2 45-9565-27-4

45-9575-27-1 45-9575-27-2 45-9575-27-4

45-9595-27-1 45-9595-27-2 45-9595-27-4

ILMV459504 REV C

NOTE: 525-600V, 3-Phase pumps are available upon request.

www.vektek.com

Outside US+1-913-365-1045

© Vektek December 2021

Made with FlippingBook - Online catalogs