Palletized Fixture Accessories
Zero-Point Systems
Installation clamping module
Specifications
Pneumatic opening. Pneumatic blow-out. Opening operating pressure:
Pull-in/ locking force up to [kN]
Model No.
Holding force [kN]
Weight [Kg]
Size
Blow out
● ●
570258 KP10.3 570259 KP20.3
10.0 17.0
25 55
1.4 2.6
KP5.3 min. 5 bar - max. 12 bar. KP10.3 min. 5 bar - max. 12 bar. KP20.3 min. 4.5 bar - max. 12 bar. Cover and piston hardened. Repeat accuracy < 0.005 mm.
Application: Zero-point clamping system for set-up-time-optimised clamping during cutting and non-cutting machining. Note: The installation clamping module has high holding, pull-in and locking forces. This is opened pneumatically (1) and mechanically locked through spring force. Subsequent uncoupling of the pressure lines is possible at all times (module is tensioned pressure-free). The clamping module with blow-out and support control has two connections: 1x pneum. opening (1), 1x pneum. blow-out and support control (3). (The pneumatic blow-out and support control can optionally be connected.)
Dimensions
Model No.
dia.D [mm]
dia.DN [mm]
dia.D1 [mm]
H [mm]
HA [mm]
dia.LK [mm]
T [mm]
Size
M
570258 KP10.3 112 22 78.0 35 10 88 M6 25 570259 KP20.3 138 32 102.0 49 15 115 M6 34
K-10
ZERO-POINT CLAMPING FROM 4.5 BAR
KP20.3
KP10.3
www.vektek.com
Outside US+1-913-365-1045
© Vektek December 2021
Made with FlippingBook - Online catalogs