Power Supplies
Booster With Control Packages Specifications
Single Acting Systems n Complete package includes everything you need to use a VektorFlo ® booster, including hardware. n Includes filter/regulator with automatic drain, gauge, check valve, control valve, mufflers and all of the fittings and tubing, ready to hook up! (Customer supplies air quick connector.) n Booster with Control package is available in manual or 24 VDC models. n An air-inlet check valve is included to prevent loss of clamping force in the event of an air line break.
Specifications
Model No.
Fluid Capacity
Intensification Ratio
Air to Hydraulic Pressure Intensifiers
45-5000-00 45-5000-01 45-5000-02 45-5000-03 45-5000-04 45-5000-05 45-5000-06 45-5000-07 45-5000-08 45-5000-09 45-5000-10 45-5000-11
11:1 Booster
180 cm 3
11:1 Booster With Manual Control 11:1 Booster With 24 VDC Control
22:1 Booster
90 cm 3
22:1 Booster With Manual Control 22:1 Booster With 24 VDC Control
NOTE: One booster can be used to operate one single acting system. Boosters are not intended for use with single acting palletized (disconnected) systems. Boosters may be mounted horizontally or vertically. If mounted vertically, the oil discharge end must point up for proper operation.
40:1 Booster
50 cm 3
40:1 Booster With Manual Control 40:1 Booster With 24 VDC Control
54:1 Booster
40 cm 3
54:1 Booster With Manual Control 54:1 Booster With 24 VDC Control ILMV550002 REV D
J-3
G1/8 OUTLET Pressure Port On Centerline
12
3.4
DIN Style Electrical Connector
.46
1/4 NPT MALE AIR INLET
9.4
7.0
4.0
9.585 With Mounting Plates Reversed
4.500
12.585 13 .3
7.0
8
Mounting holes for M6 cap screws ( 8 each )
G1/8 OUTLET Pressure Port On Centerline
12.1
3.8
.46
1/4 NPT MALE AIR INLET
7.0
4.0
4.500
9.585 With Mounting Plates Reversed
7
12.585 13.3
8
Mounting holes for M6 cap screws ( 8 each )
ILMV550002 REV D
www.vektek.com
Outside US+1-913-365-1045
© Vektek December 2021
Made with FlippingBook - Online catalogs