Palletized Fixture Accessories
Thread-In Coupling Specifications
Thread-In Coupling Elements
Coupling elements are made to give you a leak free connection- whether pressurized or depressurized. Two flow rates are allowed with your choice of two nominal diameter sizes. The compact design allows couplings to be recessed into the fixture plate. Stainless steel construction provides longservice life with replaceable face seals. Axial face seal between coupling mechanism and coupling nipple. Both elements must be positioned and guided within specified tolerances before contact with sealing surfaces. Replaceable face seals. Coupling force at operating pressure ranges from 0-3.3 and 0-7.7 kN depending on model. Replaceable face seals. Spanner and replacement seal installation tools available.
Specifications
Max. Operating Pressure
Max Flow Rate (l/min)
Coupling Stroke (mm)
Min.Coupling Force @ 0 Bar
End Type Mech.
End Type Nipple
Coupling Type
Nom. Dia.
Thread
Pressurized
45-6101-30 45-6111-30 45-6112-30 45-6102-30 45-6101-50 45-6111-50 45-6112-50 45-6102-50
M20 x 1.5 M24 x 1.5
3
350 Bar
8
4.5
94 N
Depressurized
Pressurized
5
500 Bar
12
4.5
98 N
Depressurized
NOTE: Clean face of coupling elements with compressed air prior to connecting coupling to protect from contamination intrusion. Both elements must be guided about 2-3mm before elements touch each other. Guidance should prevent the elements from moving out of axial alignment as they are coupled.
K-17
Mechanism
Tools
Spanner Tool
Seal Tool
Model No.
1 Permitted Angle Tolerance
45-6101-30 45-6102-30 45-6101-50 45-6102-50 45-6111-30 45-6112-30 45-6111-50 45-6112-50
AT-5613-00 AT-5603-00
AT-5615-00 AT-5605-00
0.3 Radial Position Tolerance
2-3 Guidance Required
AT-5613-00
N/A
AT-5615-00
N/A
+0.5 Axial Position Tolerance (Max gap engaged)
ILMV561000 REV C
Nipple
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs