Power Supplies
Screw Pumps
Threaded Body and Block Body Styles Simple, inexpensive power supply for small systems. Ideally suited to powering work supports when used on manual clamping fixtures. Heavy duty threaded screw can be driven by a precision "nut runner" for fast and precise actuation (maximum RPM = 500). Block style bolts down. The threaded body can be mounted through a bulkhead with the two locknuts provided.
Applied Torque Produces Approximate Output Pressure* Torque (Nm) Pressure (MPa) 13.5 70 bar (7) 27 140 bar (14) 34 205 bar (20.5) 40.5 275 bar (27.5) 47.5 350 bar (35) *Do not exceed 50 Nm torque. Excess torque will create higher than allowed pressure which may damage downstream devices and increase the risk of personal injury to the operator.
ILMV558100 REV B
Max. Working Pressure...........................350 bar (35 MPa) Max. Displaced Oil.................................................26 cm 3 Oil Displacement per revolution............................2.1 cm 3 Body...................................................................BHC Steel Screw...........................................Hardened Acme threads NOTE: Hoses are recommended for use on all circuits using screw pumps.
J-14
Block Body Screw Pump Model No. 45-5890-00
THREAD M35 x 1.5
12 HEX
2X 44-0035-00 LOCKNUT - INCLUDED
Threaded Body Screw Pump Model No. 45-5890-01
30.5
50.8 STROKE
12.7
G1/8 PRESSURE PORT
81
4X 5 SPANNER HOLES
104
122
ILMV558102 REV B
THREADED BODY SCREW PUMP MODEL No. 45-5890-01
www.vektek.com
Outside US+1-913-365-1045
© Vektek December 2021
Made with FlippingBook - Online catalogs