Palletized Fixture Accessories
Automatic Shutoff Valve Decouplers, One-Handed Operating Handle
Automatic Shutoff Valve Decouplers for Single and Double Acting Systems n Decouplers are a complete, self contained package for disconnecting a fixture from its power supply while machining. Everything is there for you: Quick connect coupling, accumulator, filters, pilot operated check valve and over pressure relief valve! n Robust pilot operated check valve with 1 to 5 ratio of pilot to check pressure for proven long term reliability. n Internal 25 micron filters for added protection of pilot operated check valve thru ports A1, A2, A3, A4 & C1. Additional filtration provided at port B1. (filtration for A3, B3 or A4, B4 available by purchasing Vektek filter block 47-0842-05 or 47-0842-06 depending on mounting orientation.) n G1/4 ports and manifold mounting (bottom and rear) connections on all models. n Single acting pallet circuits require 2 hoses to the operating handle for pressure release. For single hose systems see the Manual Shutoff Valve Decoupler.
PLUG "B" PORT FOR S/A SYSTEMS
B3 A3
Dimensions
A2 A4
B2 B4
Pressure Range Bar 30-100 (3-10 MPa) 70-250 (7-25 MPa) 140-350 (14-35 MPa)
Accumulator Capacity (cu. cm.)
In-Line Filter Cartridge
Filter Plate (For Manifold Mount) 47-0842-05 (Bottom A4 & B4) or 47-0842-06 (Rear A3 & B3)
Model No.
45-6007-20
62
45-6007-21
59
47-0048-81
B1 A1 C1
MINIMUM OF 20% CLAMP PRESSURE MUST BE APPLIED TO UNCLAMP
45-6007-22
52
NOTE: These automatic shutoff valve decouplers and operating handle
must be used with a suitable pump which includes a 4 port/3 position, P-blocked center (“A” & “B” connected to tank) directional control valve for operation of single or double acting systems. One automatic shutoff valve decoupler can be used to operate only one double acting or one single acting circuit. For operation of a single acting circuit, plug the decoupler outlet port “B” (as shown in the schematic).
SAE 6 PORT PLUG INSTALLED
31.5
57.5
20.2
21.1
A3
B3
K-3
28.6
G1/4 PORT ADAPTER. USE IN END PORT IF REQUIRED (SHIPPED LOOSE)
64.3
G1/4 MANIFOLD PORT
58.5
"A1" QUICK CONNECT "CLAMP"
"A1" QUICK CONNECTOR CLAMP "B1" QUICK CONNECTOR UNCLAMP G1/4 MANIFOLD MOUNT PORT DRILLED FOR M6 SHCS (4X)
41.4
30.5
G1/4 PORT
79.2
"B1" QUICK CONNECTOR "UNCLAMP"
89.4
54
177
31.8
ILMV560016 REV A
One-Handed Operating Handle n Maximum working pressure - 350 bar (35 MPa) Provides a fast, positive connection to the decoupler. n Ergonomic design reduces operator fatigue. n The One-Handed Handle may be used with the optional Handle Docking Module to assure that the hoses are disconnected from the pallet before it is shuttled into the machine. n SAFETY: See Docking Station -(End of Section K)
B4 A4
57.5
31.5
4.8
108
4.8
DRILLED FOR M6 SHCS (3X)
62.3
41.4
32.9
88.9
27
30
73.3
B1 A1
C1
B2
One-Handed Operating Handle Model No. 45-6005-00 For use with Decoupler Model Numbers 45-6007-20, 45-6007-21, 45-6007-22, 45-6007-23, 45-6007-24, 45-6007-25 45-6007-26
77.1 63.5
5.6
27
4.8
57.9
44.5
SPACER - DISCARD IF BOTTOM MANIFOLD MOUNTED. FOR FILTRATION ADD 11.4 THICK FILTER PLATE
G1/4 PORT BOTH ENDS (WITH ADAPTER)
117.3
ILMV560015 REV B
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs