Palletized Fixture Accessories
Automatic Shutoff Valve Decoupler Block and Two-Handed Operating Handle with Air
Automatic Shutoff Valve Decouplers for Single and Double Acting Systems n Decouplers are a complete, self contained package for disconnecting a fixture from its power supply while machining. Everything is there for you: Quick connect coupling, accumulator, filters, pilot operated check valve and over pressure relief valve! n Robust pilot operated check valve with 1 to 5 ratio of pilot to check pressure for proven long term reliability. n Internal 25 micron filters for added protection of pilot operated check valve thru ports A1, A2, A3, A4 & C1. Additional filtration provided at port B1 (filtration for A3, B3 or A4, B4 available by purchasing Vektek filter block 47-0842-05 or 47-0842-06 depending on mounting orientation.) n G1/4 ports and manifold mounting (bottom and rear) connections on all models. n Single acting pallet circuits require 2 hoses to the operating handle for pressure release. For single hose systems see the Manual Shutoff Valve Decoupler.
A3 AIR
PLUG "B" PORT FOR S/A SYSTEMS
B4
A4
A2 A5
B2 B5
B3
MINIMUM OF 20% CLAMP PRESSURE MUST BE APPLIED TO UNCLAMP NOTE:
AIR
B1
C1 A1
These automatic shutoff valve decouplers and operating handle must be used with a suitable pump which includes a 4 port/3 position, P-blocked center (“A” & “B” connected to tank) directional control valve for operation of single or double acting systems. One automatic shutoff valve decoupler can be used to operate only one double acting or one single acting circuit. For operation of a single acting circuit, plug the decoupler outlet port “B” (as shown in the schematic).
Dimensions Accumulator Capacity (cu. cm.)
Pressure Range Bar
In-Line Filter Cartridge
Filter Plate (For Manifold Mount) 47-0842-05 (Bottom A4 & B4) or 47-0842-06 (Rear A3 & B3)
Model No.
45-6007-33 30-100 (3-10 MPa)
62
45-6007-34 70-250 (7-25 MPa)
59
47-0048-81
45-6007-35 140-350 (14-35 MPa)
52
For use with Operating Handle Model No. 45-6007-01.
39.4
39.4
A
A
Pallet Decoupler Cover
57.9
21 15
5.6
B1
Model No.
For use with Decoupler Models 45-6007-27, 45-6007-28, 45-6007-29,45-6007-33, 45-6007-34 and 45-6007-35 40.6
A1
A
40.6
AIR
28.6
32.9
ILMV560031REV A
ILMV560031REV A
28.3 61.6
G1/4 PORT ADAPTER. USE IN END PORT IF REQUIRED (SHIPPED LOOSE)
45-6007-05 12.7
95.3
K-7
3X DRILL FOR M6 SHCS
45-6007-03, 45-6007-30, 45-6007-31 and 45-6007-32
Also use with Decoupler with Air (next page)
G1/4 MANIFOLD MOUNT
28.3 61.6 85.8
Customers that have previously bought a decoupler can purchase a new cover for their old decoupler. New orders of decouplers will come with cover.
4.8
27
100 lb. Tensile Strength
31.8
A5 AIR B5
54
4X DRILLED FOR M6 SHCS
55.9
AIR 1/8 NPT & MANIFOLD MOUNT
4.8
57.2
108
"B1" QUICK CONNECTOR UNCLAMP AIR QUICK CONNECT "A1" QUICK CONNECTOR CLAMP
"A1" CLAMP QUICK COUPLER
139.5
AIR 1/8 NPT & MANIFOLD MOUNT
G1/4 PORT BOTH ENDS (WITH ADAPTER)
G1/4 MANIFOLD MOUNT
119.3
28.3
"B1" UNCLAMP QUICK COUPLER PNEUMATIC QUICK COUPLER
243.8
21
G1/4
50.8
A4
28.6
B4
A2
AIR
61.6
27
17.2 28.6
4.8
SPACER; DISCARD IF BOTTOM MANIFOLD
27
85.8
63.5
117.3
MOUNTED. FOR FILTRATION ADD 11.4 THICK FILTER PLATE
ILMV560019 REV A
105.4
76.2
Two-Handed Operating Handle with Air n Maximum working pressure - 350 bar (35 MPa) Provides a fast, positive connection to the decoupler. n Ergonomic design reduces operator fatigue. n The Two-Handed Handle may be used with the optional Handle Docking Module to assure that the hoses are disconnected from the pallet before it is shuttled into the machine. n SAFETY: See Docking Station -(End of Section K)
ILMV560020 REV A
Two-Handed Operating Handle With Air Model No. 45-6007-01
For use with Decoupler Model Number 45-6007-33, 45-6007-34, 45-6007-35
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs