Accessory Valves
Sequence Valve Cavity
Adjustment Screw Lock Nut
24 Hex
Sequence Valve Cartridge Model No. Set Range A B Max. Flow 47-0440-00 52 to 350 bar 82.3 44.5 5.7 l/min 47-0440-01 20 to 62 bar 96.5 60.2 11.4 l/min Maximum inlet pressure for SEQ valves is 350 bar.
B
A
M20x1.5
NOTE: Maximum system flow rate is 5.7 l/min. for all VektorFlo® special function valves. Excess flow voids warranty. Recommended filtration: 25 Micron (Nom)/ 40 Micron (ABS) (min.)
27.7
ILMV470440 REV E
30 5 0.1 A
30.3 0.25
0.05 A 21.39 0.1
0.05 A Minor 18.64 0.13
0.1 A 0.25 0.13
1.6
111
Thread M20x1.5 11.3 Min. 0.05 A
101.6
3 0.13
30.42 MIN TOP OF HOLE DEPTH
16.5 9.28 MIN MAX
45 5
16.66 0.13
31.75 0.76
16.76 0.13
34.9 MIN DEPTH
5.2 0.38
15.04 0.02
M-11
Sequence Outlet
16.5
19
1.6
30 5
-A-
65-3002-02 STEP REAMER
65-3002-01 TAP M20 x 1.5
ANGLE OF INLET AND OUTLET HOLES CAN VARY AS LONG AS THE HOLE ENTERING THE CAVITY LIES BETWEEN THE MIN AND MAX DIMENSIONS SPECIFIED
ILM704401 REV G
5.2 0.38 Pressure Inlet
12.7 0.25
NOTE: For cavity tooling (multi-step Reamer and M20 x 1.5 Tap), order kit 62-7040-00
If a sequence valve is no longer needed, use 30-6011-20 plug, to cap cavity for free fluid pass through.
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs