Swing Clamp Arms
TuffCam ™ Low Profile Swing Clamp Arms
N
L
T
D
G
J CAP SCREW (INCLUDED)
H
R
RADIUS B
K THREAD
RADIUS C
A
ILMV410101 REV L
Low Profile Standard Arm Dimensions
Model No.*
Capacity (kN)
A B C D G H
J
K L N R T
44-1031-00 44-1032-00
22 63.5 25.5 14.5 15.4 12.5 31.75-31.80 M16 x 1.5 M12 x 1.75 25 0.5 22.5 43.8 33 68 35 14.2 16.4 14.2 38.11-38.16 M16 x 1.5 M16 x 2 25 N/A 25.6 44.5
* 44-1031-00 For use with Low Profile Swing Clamp Model 41-4622-XX, 41-4222-XX For an arm without a tapped hole order 91-5218-11 44-1032-00 For use with Low Profile Swing Clamp Models 41-4633-XX, 41-4233-XX For an arm without a tapped hole order 91-5221-06
It is recommended that the cross bolt is replaced if the arm needs to be removed after it has been in service.
NOTE: Replacement Cap Screw for 44-1031-00 and 91-5218-11 is Model No. 21-5000-24 Replacement Cap Screw for 44-1032-00 and 91-5221-06 is Model No. 21-5000-28
M
L
F
D
E
G
H
J CAP SCREW (INCLUDED)
All dimensions are in mm.
C
NOTE: Follow arm length
O-8
RADIUS K
limitations at the start of this section.
B
ILMV411101 REV N
A
Low Profile Extended Arm Dimensions
Model No.*
Capacity (kN)
A B C D E
F G H J
K L M
44-1131-00 44-1132-00
22
165 68.3 28.5 18.4 31.75-31.80 43.8 12.5 22.5 M16 x 1.5 25.5 25 75.3
33 180.3 64.6 30.2 33.8 38.11-38.16 44.5 14.2 25.6 M16 x 1.5 35 25 45.2
* 44-1131-00 For use with Low Profile Swing Clamp Models 41-4622-XX, 41-4222-XX
It is recommended that the cross bolt is replaced if the arm needs to be removed after it has been in service.
44-1132-00 For use with Low Profile Swing Clamp Models 41-4633-XX, 41-4233-XX
NOTE: Replacement Cap Screw for 44-1131-00 is Model No. 21-5000-24 Replacement Cap Screw for 44-1132-00 is Model No. 21-5000-28
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs