Swing Clamp Arms
TuffCam ™ Low Profile Swing Clamp Arms
30
T
M
G
N
F
J CAP SCREW (INCLUDED)
H
R
2x RADIUS C
RADIUS C
B
P
A
ILMV414101 REV L
Low Profile Upreach Arm Dimensions
Model No.*
Capacity (kN)
A B C F G H
J
M N P R T
44-1431-00 44-1432-00
22 33
76 51 14.5 36.5 13.5 31.75-31.80 M16 x 1.5 44.5 38 38 22.5 70 81 69.9 14.3 39.6 13.5 38.11-38.16 M16 x 1.5 44.5 45 41.3 25.6 76.2
* 44-1431-00 For use with Low Profile Swing Clamp Models 41-4622-XX, 41-4222-XX
It is recommended that the cross bolt is replaced if the arm needs to be removed after it has been in service.
44-1432-00 For use with Low Profile Swing Clamp Models 41-4633-XX, 41-4233-XX
NOTE: Replacement Cap Screw for 44-1431-00 and 44-1432-00 is Model Number 21-5000-25
2x L
T
2x D
G
R
H
J CAP SCREW (INCLUDED)
ILMV412102 REV M
All dimensions are in mm.
2x RADIUS M
2x K
O-9
2x C
A
A
Low Profile Double Ended Arm Dimensions
Model No.*
Capacity (kN)
A C D G H
J
K L M R T
44-1231-00 44-1232-00
22
140 28.5 19.1 12.5 31.75-31.80 M16 x 1.5 70.5 25 25.5 22.5 44.5
33 180.3 30.2 33.8 14.2 38.11-38.16 M16 x 1.5 44.6 25 35 25.6 44.5
* 44-1231-00 For use with Low Profile Swing Clamp Models 41-4622-XX, 41-4222-XX
It is recommended that the cross bolt is replaced if the arm needs to be removed after it has been in service.
44-1232-00 For use with Low Profile Swing Clamp Models 41-4633-XX, 41-4233-XX
NOTE: Replacement Cap Screw for 44-1231-00 is Model No. 21-5000-24 Replacement Cap Screw for 44-1232-00 is Model No. 21-5000-28
www.vektek.com
Outside US+1-913-365-1045
© Vektek December 2021
Made with FlippingBook - Online catalogs