Directional Control Valves
Solenoid 3-Port, 2-Position / Solenoid 4-Port, 3 Position
NO
NC
Solenoid Valve: 3-Port, 2-Position For use with single acting systems.
CETOP 3 Mounting Pattern
45
45
21.8
137
ILMV711103 REV F
Solenoid
Model No.
Replacement Valve Connector
Solenoid Voltage
Power Consumption
Duty Rating
Maximum Cycle Rate
Function
Normally Open Normally Closed
47-1112-54
85-5342-91
24VDC 28 Watts
100% 2000/hr
47-1115-03
85-5342-91
24VDC 28 Watts
Solenoid Valve: 4-Port, 3-Position These valves can be used to control a double acting workholding system. (May also be used to control single acting systems) Provide improved control of clamping circuits with true poppet design. Multiple coil voltages available. Internal design promotes improved service life. Narrow width allows mounting of multiple valves on standard CETOP 3 manifolds. All valves have built-in P-Block check for fail safe multi-valve operation. Coils can be easily replaced.
CC
PBC
CETOP 3 Mounting Pattern
N-7
50.8
47.8
50.8
231
ILMV471100 REV E
Solenoid Valve Connector Part No.
Power Usage (watts)
Solenoid Voltage
Duty Rating
Model No. Function
47-1123-21 Closed Center
85-5342-91 24 VDC 27.6
100%
47-1123-40 P-Blocked Center 85-5342-91 24 VDC 27.6
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs