Work Supports
Part Present Sensing, High Capacity, Fluid Advance
B
K
M
4X R THRU S
C STROKE
N
E
D
J
AA
MANIFOLD HYDRAULIC PORT*
G HEX
B-8
Q
P
L
AB
AC
H
Y
X HYDRAULIC PORT*
A THREAD
F
V HEX x W THREAD
T
MANIFOLD AIR PORT
Y
Y
AD AIR INLET PORT
X HYDRAULIC PORT OR IN-PORT DEVICE*
ILMV100725 REV F
For proper sealing, all mating surfaces should be flat within 0.08 mm with a maximum surface roughness of 1.6 µm R a . Hydraulic oil feed holes for manifold mounting Ø 2.3mm to Ø 5mm.
*THE P1, P2 AND MANIFOLD PORTS ARE ALL CONNECTED AND ANY OF THEM CAN BE CHOSEN TO CONNECT HYDRAULIC PRESSURE.IN-PORT DEVICES CAN ONLY BE INSTALLED IN P1.
Cartridge Dimensions
Model No. A BCDEFGHJKLMNPQ 41-0806-20-PS M26 X 1.5 74.8 6.5 23.7 37 5.3 23 14.3 7.1 36 36 27 13.5 27 13.5 41-0806-26-PS M26 X 1.5 87.5 12.5 35.4 37 5.3 23 14.3 7.1 36 36 27 13.5 27 13.5 41-0808-20-PS M35 X 1.5 94.2 6.5 38.1 37 9.3 30 19 9.5 44 44 33 16.5 33 16.5 41-0808-26-PS M35 X 1.5 106.8 12.5 47.9 37 9.3 30 19 9.5 44 44 33 16.5 33 16.5 41-0810-20-PS M45 X 1.5 125.7 15.9 61.7 37 10.2 38 25.2 15.1 55 55 44 22 44 22 Model No. R S T V W X YAAABAC AD 41-0806-20-PS 4.5 8 28 11 M8 x 1.25 x 5 G1/8 10.5 7 7 9 M5 x 0.8 41-0806-26-PS 4.5 8 28 13 M10 x 1.50 x 5 G1/8 10.5 7 7 9 M5 x 0.8 41-0808-20-PS 5.5 9.5 27 17 M12 x 1.75 x 6.5 G1/8 10.5 10 10 13 M5 x 0.8 41-0808-20-PS 5.5 9.5 27 17 M12 x 1.75 x 6.5 G1/8 10.5 10 10 13 M5 x 0.8 41-0810-20-PS 5.5 9.5 27 21 M15 X 1.0 X 8 G1/8 10.5 10 10 16 M5 x 0.8
PART PRESENT SENSING WORK SUPPORT AIR FLOW
Workpiece
POPPET CLOSED & AIR PRESSURE BUILDS
POPPET OPEN & AIR VENTS UNDER CONTACT BOLT
WORK SUPPORT ADVANCES
Air Sensing Control Kit 45-0824-00
ILMV100728 REV A
Air Pressure Sensor Switch
Gauge
Air Supply
Max. 8 Valves
OIL FEED HOLE
AIR FEED HOLE
Flow Control Valve Air Pressure Regulator
ILMV504087 REV C
www.vektek.com
Outside US+1-913-365-1045
© Vektek December 2021
Made with FlippingBook - Online catalogs