Work Supports
Spring Advance Dimensions
K
B
L
E
D
M
F
N
B-12
G HEX
C STROKE
Q
S
J PLUNGER THREAD
AD
H
P
R
T (3X)
AE
A THREAD
AA
X PRESSURE PORT
V BREATHER
Z
W Y
ILMV100503 REV G
For proper sealing, the mating surface must be flat within 0.08 mm, with a maximum surface roughness of 1.6 µm R a
All dimensions are in millimeters.
Dimensions
Model No.
A B C D E F G H
J
K L M
Spring Advance Supports, spring force lifts plunger, part weight depresses plunger, hydraulic pressure locks.
41-0050-07 M26 x 1.5 56 6.5 25 24 5.5 23 16 M8 x 1.25 Tv 7.5 33.5 16.5 24.5 41-0050-06 M35 x 1.5 70.5 9.5 33 25 6.5 30 20.5 M10 x 1.5 Tv 11.5 41.5 20.5 30 41-0050-04 Ø 57 111 12.5 68.5 25 12.5 50 38 M12 x 1.75 Tv 15 63.5 31.5 52.5 41-0050-05 Ø 76 133 19 76 31.5 12.5 70 51 M16 x 2 Tv 20 89 44.5 73 Model No. N P Q R STVWXY Z AA AD AE Spring Advance Supports, spring force lifts plunger, part weight depresses plunger, hydraulic pressure locks. 41-0050-07 12 44.5 17.5 31 13 5.5 G1/8 9 G1/8 9 8.5 7 N/A N/A 41-0050-06 15 59 24 43 18 7 G1/8 10 G1/8 10 8.5 7 N/A N/A 41-0050-04 26 76 31.5 61 26 7 G1/8 16 G1/8 16 10.3 N/A 28.5 4 41-0050-05 36.5 97 44.5 81.5 36.5 9 G1/8 24 G1/8 24 10.3 N/A 41.5 4
55.6
11.1
44.5
8.9
33.4
6.7
22.2
4.4
11.1
2.2
70 140 210 280 350
0
0
70 140 210 280 350
Input Pressure (bar) (0-35 MPa) Spring & Air Advance
Input Pressure (bar) (0-35 MPa) Spring & Air Advance
4.4 kN 11 kN
33 kN
55 kN
Model No. Model No. 41-0051-07 41-0051-06 41-0050-07 41-0050-06 41-0061-07 41-0061-06 41-0060-07 41-0060-06
Model No. Model No. 41-0050-04 41-0050-05 41-0060-04 41-0060-05
ILMV100508 REV E
ILMV100507 REV E
www.vektek.com
Outside US+1-913-365-1045
© Vektek December 2021
Made with FlippingBook - Online catalogs