Work Supports
Air Advance Dimensions
Cavity Check List Confirm capacity of item selected. Note the sealing surface finish requirements. Minimum depth specification represents the nominal depth of the standard Vektek base dimension. Confirm cavity drawing is appropriate for the model number used. Note specified thread depth when cutting threads. When using a bottoming tap tool modifications may be required. When hand tapping threads, perpendicularity is essential. The 'fluid' passage is located on the outer diameter and 'vent' passage is in the center.
B-17
SEALS
A THREAD
J PLUNGER THREAD
M
H
G HEX
E
F
C STROKE
D
ILMV100604 REV G
B
Cartridge Dimensions
Model No.
A B C D E F G H J
M
Work Support, Air Rise, Cartridge 41-0061-07 M26 x 1.5 41 6.5 40.5 7.5 5.5 23 16 M6 x 1 7.5 24 41-0061-06 M35 x 1.5 52.5 9.5 49.5 8.5 6.5 30 20.5 M8 x 1.25 6 31 Tv Tv
All dimensions are in millimeters.
NOTE: DIN ISO 2768 T1 and T2 not applicable
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs