Work Supports
Fluid Advance Dimensions
B
K
M
E
D
C STROKE
(L)
N
G HEX
J
Q
(Q)
S
B-20
P
R
AC
T (3X)
H
F
A THREAD
V HEX x W THREAD
L
AB
MANIFOLD MOUNT PORT USES 9.12 X 3.53mm O-RING FOR 41-0070-03, 41-0070-13 & 41-0070-05**
Y
Z
AA *
X PRESSURE PORT
MANIFOLD MOUNT PORT USES 5.94 X 3.53mm O-RING FOR 41-0070-04 & 41-0070-14**
ILMV100706 REV M
Dimensions ModelNo.**A B C D E F G H J
K L M N P
Fluid Advance Work Support, hydraulic pressure pushes a spring which lifts plunger; hydraulic pressure locks in place.
41-0070-04 41-0070-14 41-0070-03 41-0070-13
62.5 6.5 28.5 75 12.5 41 82.5 6.5 34
M26 x 1.5
23 5.5 23
16 3.5 33.5 16.5 24.4 12.2 44.5
M35 x 1.5
31.5 9
30 20.5 5 41.5 21 30.2 15.1 58.5
95.5 12.5 47 41-0070-05 M60 x 1.5 82.5 12.5 40 25 12.5 54
38
5 73 36.5 52.4 26.2 81
Model No.** Q R S T V
W
Y Z AA AB AC
X
Fluid Advance Work Support, hydraulic pressure pushes a spring which lifts plunger; hydraulic pressure locks in place.
41-0070-04 41-0070-14 41-0070-03
M8 x 1.25 x 5 M10 x 1.5 x 5
17.5
31 13 5.6 13
G1/8 9 8.5 7 9.7 17.5
24
43.1 18.3 7.1 19
M12 x 1.75 x 6.5
G1/8 10.5 10.5 N/A N/A N/A
41-0070-13 41-0070-05 36.5 62.6 26.2 7.1 19
M12 x 1.75 x 6.5
G1/8 16 10.5 N/A N/A N/A
All dimensions are in millimeters.
NOTE: DIN ISO 2768 T1 and T2 not applicable * Dimension "AA" applies to models 41-0070-04 and 41-0070-14 only. ** All models have one manifold mount pressure port that is plugged at the time of assembly. Refer to drawing ILMV100706 for the manifold mount pressure port location. For manifold mounting, remove the port plug and install the O-Ring (provided) at final installation.
For proper sealing, the mating surface must be flat within 0.08 mm with a maximum surface roughness of 1.6 µm R a
7.3
17.8
5.8
13.3
4.4
8.9
2.9
4.4
1.5
Input Pressure (bar) (0-35 MPa) Fluid Advance 70 140 210 280 350
0
0
70 140 210 280 350
Input Pressure (bar) (0-35 MPa) Fluid Advance
11 kN 13.4 kN 17 kN Model No. Model No. Model No. 41-0070-03 41-0070-13 41-0070-05 41-0071-03 41-0071-13 41-0071-05 ILMV100711 REV E
4.4 kN 6.2 kN
7.3 kN
Model No. Model No. 41-0070-04 41-0070-14 41-0171-12 41-0071-04 41-0071-14 Model No.
ILMV100710 REV H
www.vektek.com
Outside US+1-913-365-1045
© Vektek December 2021
Made with FlippingBook - Online catalogs