Work Supports
Fluid Advance Dimensions
Cavity Check List Confirm capacity of item selected. Note the sealing surface finish requirements. Minimum depth specification represents the nominal depth of the standard Vektek base dimension. Confirm cavity drawing is appropriate for the model number used. Note specified thread depth when cutting threads. When using a bottoming tap tool modifications may be required. When hand tapping threads, perpendicularity is essential. Fluid passage is located in the center.
B-21
C STROKE
G HEX V HEX x W THREAD
M
H
A THREAD
J
E
F
D
B
GASKET (MODELS 41-0071-04, 41-0071-14, 41-0071-03 & 41-0071-13 ONLY) WILL COMPRESS TO APPROXIMATELY 0.5 WHEN INSTALLED.
ILMV100705 REV M
Cartridge Dimensions
Model No.
A
B C D E F G H J
M V
W
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks in place.
41-0071-04 41-0071-14
53.5 6.5 42.5 66.5 12.5 55.5
3.5 3.5
M8 x 1.25 Tv 5 M10 x 1.5 Tv 5
M26 x 1.5
7 5.5 23 16
23.3 13
41-0171-12 M30 x 1.5
67 12.5 56.5 9 5.5 24 16 3.5 28.3 13 M10 x 1.5 Tv 5
41-0071-03 41-0071-13
72 6.5 55 84.5 12.5 68
5
M12 x 1.75 Tv 6.5 M12 x 1.75 Tv 6.5
M35 x 1.5
9.5 9
30 20.5
29.7 19
5 41-0071-05 M60 x 1.5 72.5 12.5 55 6.5 12.5 54 38 5 54.8 19 M12 x 1.75 Tv 6.5
All dimensions are in millimeters.
Note: DIN ISO 2738 T1 & T2 not applicable.
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs