TuffCam ™ Swing Clamps
Low Profile Rod Position Sensing
Low Profile Rod Position Sensing Swing Clamps n Available for use on both 22 kN and 33 kN double acting TuffCam™ Low Profile Swing Clamps. n Remove suffix - PR - and refer to the base model assembly part number for all other dimensions. n Actuator Rod Position System can be used with a mechanical switch or air logic system to detect when clamped or unclamped position. n Actuator rod is concentric to plunger shaft. n All TuffCam™ features apply to these units. Standard swing is 90°; swing angles of less than 90° require Swing Restrictors. Swing
C-17
angles greater than 90° are special order products. n Arm clocking feature is compatible with all standard Vektek arms. n Actuator rod moves with the same rotary and linear motion as the plunger. Optional In-Port Flow Control is a meter-in device with reverse free flow check valve. Optional In-Port Sequence valve is a sequencing device with reverse free flow check valve. Low Profile Rod Position Sensing System Model No. Clamp Swing Direction Cylinder Capacity (kN) A (mm)
U.S. Patent Nos. 6,886,820 7,032,897
Port X Depth for Optional In-Port Valves*
TuffCam ™ Bottom Flange (D/A) clamps, hydraulic retract and extend
41-4222-21-PR 41-4222-22-PR
Right
Left 41-4222-25-PR Straight 41-4233-21-PR Right Left 41-4233-25-PR Straight 41-4233-22-PR
22
46.5
G1/4 x 18.72
33
48.5
G1/4 x 18.72
TuffCam ™ Top Flange (D/A) clamps, hydraulic retract and extend
41-4622-21-PR 41-4622-22-PR
Right
22
46.5
G1/4 x 18.72
Left 41-4622-25-PR Straight 41-4633-21-PR Right
18 LENGTH
33 Left 41-4633-25-PR Straight TuffCam ™ Bottom Flange Long Stroke (D/A) clamps, hydraulic retract and extend 41-4222-26-PR Right 41-4222-27-PR Left 22 64 G1/4 x 18.72 41-4222-28-PR Straight 41-4233-26-PR Right 41-4233-27-PR Left 33 64 G1/4 x 18.72 41-4233-28-PR Straight TuffCam ™ Top Flange Long Stroke clamps, hydraulic retract and extend 41-4622-23-PR Right 22 64 G1/4 x 18.72 41-4622-24-PR Left 41-4622-26-PR Straight 41-4633-23-PR Right 33 64 G1/4 x 18.72 41-4633-24-PR Left 41-4633-26-PR Straight * In-Port Valves require the use of manifold mount ports. 48.5 G1/4 x 18.72 41-4633-22-PR
ROD FULLY RETRACTED
28.74 PILOT BOSS, OPTIONAL
A LENGTH
1.2
6.33
ROD FULLY EXTENDED
5 WRENCH FLAT
4 WRENCH FLAT
M5 X 0.8 THREAD
10 THREAD LENGTH
ILMV414607 REV E
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs