Link Clamps and Levers
TuffLink™ 360° Single Acting Dimensions
B AC
P
C
Q R
3 CLAMP ANGLE
E
AG
AH
AD
D
L
D-9
AB
V
S
A
T
AE
Y
4X K THRU J
H
N TOTAL STROKE
CLAMP MANIFOLD PORT
G
AA CLAMP PORT
M CLAMP STROKE
X
F
ILMV166005 REV E
AF
Dimensions
Model No. A B C D E
F G H J
K L M N P Q R
Single Acting (S/A) Cylinders, actuated hydraulically 1 direction.
41-6112-00 31.77 81.2 65.00 37.5 51.00 31.50 41-6115-00 35.77 90.52 72.50 46.1 54.50 31.50 41-6118-00 39.77 104.73 80.50 55.8 60.50 32.50 41-6122-00 47.77 118.12 91.50 68.5 66.50 33.00
12 8.25 4.8 24.50 16.50 19.50 42 21 16.5 15 9.75 5.8 22.30 19.80 23.30 50 25 20 18 11.25 6.8 21.30 24.40 28.15 62 31 25
15.50
22 14.5 8.8 18.50 29.50 34.00 75 37.5 30 41-6128-00 54.77 140.73 107.75 79.0 77.75 38.25 17.25 28 17.25 10.8 20.50 35.10 40.10 90 45 36.5 Model No. S T V X Y AA AB AC AD AE AF AG AH Single Acting (S/A) Cylinders, actuated hydraulically 1 direction. 41-6112-00 16.5 56 21 10.00 27.00 G1/8 35 85.16 19 50 56.00 37.50 21.5 41-6115-00 20 61 25 11.00 28.00 41.5 97.69 18 61.94 60.50 38.50 27.0 41-6118-00 25 72 31 14.00 33.00 51 109.35 19 71.79 68.50 41.00 30.50 41-6122-00 30 86 37.5 16.00 39.00 59 126.83 19 87.63 76.50 43.50 37.0 41-6128-00 36.5 101 45 18.00 45.00 G1/4 72 144.35 20 99.63 89.75 50.25 44.5
Levers are to be adjusted to within +/-3° of nominal clamp angle to prevent premature failure.
For proper sealing, the mating surface must be flat within 0.0762 mm with a maximum surface roughness of 1.6 µm R a
Manifold Port/Bolt Mounting Dimensions
Clamp Capacity (kN)
Model No.
A K R S W X Y
41-6112-00 41-6115-00 41-6118-00 41-6122-00 41-6128-00
2.73 4.36 6.22 10.4 15.9
32 M4 x 0.7 16.5 16.5 36 M5 x 0.8 20 20 40 M6 x 1 25 25 48 M8 x 1.25 30 30 55 M10 x 1.5 36.5 36.5
10 27 11 28 14 33 16 39 18 45
4
For proper sealing, the mating surface must be flat within 0.08 mm with a maximum surface roughness of 1.6 µm R a
www.vektek.com
Outside US+1-913-365-1045
© Vektek December 2021
Made with FlippingBook - Online catalogs