Link Clamps and Levers
Link Clamp Dimensions
For proper sealing, the mating surface must be flat within 0.08 mm with a maximum surface roughness of 1.6 µm R a
AC
P
B
Q
R
C
AG
AH
E
2X L
3 CLAMP ANGLE
AD
4X K
D
AB
A THREAD
S
Y
V
D-13
T
AE
Z
J
M CLAMP STROKE N TOTAL STROKE
CLAMP MANIFOLD PORT
30 TYP
UNCLAMP MANIFOLD PORT AA UNCLAMP PORT DA ONLY
W COUNTERBORE MOUNTING HOLE
H
G
F
2X X
AA CLAMP OR PORT DEVICE
AF
ILM166002 REV M
Dimensions
Model No.
A
B C D E F G H J
K L M N P Q
Single Acting (S/A) Cylinders, actuated hydraulically one direction spring returned. 41-6610-40 M28 x 1.5 - 6G 85.1 66.8 47.6 50.8 25.4 13.3 7.9 9.5 5.9 9.5 21.4 23.8 49.2 24.6 41-6610-60 M38 x 1.5 - 6G 106.8 85.9 57.2 63.5 33.3 15.9 11.1 11.1 7.1 12.7 26.2 28.6 63.5 31.8 41-6610-90 M48 x 1.5 - 6G 135.9 109.5 63.5 77.7 41.3 21.2 15.9 17.1 11.1 12.7 31.7 34.1 82.6 41.3 41-6611-40 M65 x 1.5 - 6G 171.5 139.7 76.2 95.3 47.6 22.2 25.4 19.1 13.1 19.1 41.3 44.5 104.8 52.4 Double Acting (D/A) Cylinders, actuated hydraulically both directions. 41-6620-40 M28 x 1.5 - 6G 85.1 66.8 47.6 50.8 25.4 13.3 7.9 9.5 5.9 9.5 21.4 23.8 49.2 24.6 41-6620-60 M38 x 1.5 - 6G 106.8 85.9 57.2 63.5 33.3 15.9 11.1 11.1 7.1 12.7 26.2 28.6 63.5 31.8 41-6620-90 M48 x 1.5 - 6G 135.9 109.5 63.5 77.7 41.3 21.2 15.9 17.1 11.1 12.7 31.7 34.1 82.6 41.3 41-6621-40 M65 x 1.5 - 6G 171.5 139.7 76.2 95.3 47.6 22.2 25.4 19.1 13.1 19.1 41.3 44.5 104.8 52.4 ModelNo.R S T V W X Y Z AA AB ACAD AE AF AGAH Single Acting (S/A) Cylinders, actuated hydraulically one direction spring returned. 41-6610-40 19.1 11.1 55.7 28.7 16.8 17.5 11.1 19.1 G1/8 44.5 86.3 24 59.4 55.6 14.3 44.5 41-6610-60 25.4 12.7 71.4 38.1 12.8 24.6 9.5 25.4 G1/8 57.2 98.7 29 66.7 69.9 19.1 54.0 41-6610-90 33.3 15.9 88.9 47.6 24.5 31.8 11.1 31.8 G1/4 69.9 122.3 29 81.5 87.3 22.2 69.9 41-6611-40 42.9 19.1 114.3 60.3 18.9 41.3 15.9 41.3 G1/4 88.9 155.1 27.5 106.3 108.0 28.6 85.7 Double Acting (D/A) Cylinders, actuated hydraulically both directions. 41-6620-40 19.1 11.1 55.7 28.7 16.8 17.5 11.1 19.1 G1/8 44.5 86.3 24 59.4 55.6 14.3 44.5 41-6620-60 25.4 12.7 71.4 38.1 12.8 24.6 9.5 25.4 G1/8 57.2 98.7 29 66.7 69.9 19.1 54.0 41-6620-90 33.3 15.9 88.9 47.6 24.5 31.8 11.1 31.8 G1/4 69.9 122.3 29 81.5 87.3 22.2 69.9 41-6621-40 42.9 19.1 114.3 60.3 18.9 41.3 15.9 41.3 G1/4 88.9 155.1 27.5 106.3 108.0 28.6 85.7
All dimensions are in mm.
Manifold Port/Bolt Mounting Dimensions Model No. Cap. (kN) A B C D E F G Double Acting (D/A) Cylinders, actuated hydraulically both directions. 41-66X0-40 2 M5 x 0.8 28.58 19.05 11.10 19.05 11.10 17.48 41-66X0-60 5 M6 x 1 39.67 25.40 12.70 25.40 9.53 24.61 41-66X0-90 11 M10 x 1.5 49.20 31.75 15.88 33.32 11.10 31.75 41-66X1-40 22 M12 x 1.75 66.00 41.28 19.05 42.85 15.88 41.28
NOTE: Levers are to be adjusted to within +/- 3° of nominal clamp angle to prevent premature failure.
www.vektek.com
Outside US+1-913-365-1045
© Vektek December 2021
Made with FlippingBook - Online catalogs