Special Use Clamps
Power Pin
Power Pin n Spring Position and Hydraulic Clamping Pin. n Spring force pushes part into position against fixed stops and hydraulic pressure keeps the part clamped during machining. n Hydraulic manifold mounted. n Hardened club heads, threaded pivot and spring cup. n Club Heads sold separately. n BHC™ (Black Hard Coat) body finish. n Adjust club height then rotate the body to adjust position, adjust spring retention force and location.
MOUNTING
1.752 .001
CLAMP FEED HOLE .13 .09 2.625 .469 2.250
E-10
12 MAX
45 TYP
CONTACT FORCE
2.59
1.66 .11
4X .34
2.25
1.12
.44
.18
1.748
2.125 4X 5/16-18 UNC .50 EQ SP AS SHOWN WITH RETAINER RING
1/2-20 UNF
1.620
CLAMP PORT (O-RING SEAL PROVIDED)
HOLE SIZE
MOUNTING RETAINER (INCLUDED)
2.125
ILS157100 REV D
Power Pin
ILS157101 REV B
Hydraulic Contact
Spring Contact Force (lbs.)***
For proper sealing, mating surface must be flat within 0.003 in. with a maximum 63 µ in. R a surface finish.
Pin Lever Ratio
Piston Area (sq. in.)
Oil Capacity (cu. in.)
Hole Size Ø (in.)
Model No.*
Force (lbs.)**
15-7110-00
600
4.2-6.1
0.785
0.425 1:4.2 1.752
* Club heads are sold separately. ** Hydraulic Contact Force is calculated at 5,000 psi maximum operating pressure. Force values are calculated at the end of the threaded pivot. The hydraulic contact force is adjustable by varying the hydraulic system pressure. To determine the approximate hydraulic contact force for your application divide the hydraulic contact force shown above by 5,000 and multiply the resultant number by your system operating pressure. Actual force values will vary at the part depending on the club head design and location of contact. *** Spring Contact Force values are calculated at the end of the threaded pivot. Actual force values vary at the part depending on the club head design and location of the contact.
Hardened alloy steel for long life.
Club Heads Model No.
A B C D E
F
Standard Club Head 15-8010-01 1.14 1.50 1.10 0.75 0.69 1/2-20 Ball Club Head 15-8010-02 0.99 1.50 1.10 0.75 0.69 1/2-20 Pin Club Head 15-8010-03 0.99 1.50 1.11 0.75 0.69 1/2-20
www.vektek.com
800-992-0236
© Vektek, January 2023
Made with FlippingBook - Online magazine maker