Special Use Clamps
Pull-Down Clamp
A
R STROKE
G CLAMP PORT
SERRATED
B
W
P
J
E-12
Q
E .02 D
F*
F
Y.02 X
4x S THREAD
2X H
3x M
C
2x N
V
T BOTTOM CLAMP PORT FOR MANIFOLD MOUNTING (O-RING SUPPLIED)
K
ILS153104 REV M
2x L
*
Vertical travel should be restricted so that stroke “f” can not be exceeded.
NOTE: The vertical travel of stroke “F” can not be exceeded.
** Plug not available. Use O-Ring to seal manifold port if “G” clamp port is being used.
For proper sealing, mating surface must be flat within 0.003 in. with a maximum 63 µ in. R a surface finish.
N P
Q R
S
T Y Cylinders, actuated hydraulically 1 direction, spring returned. V W X
0.87 1.42 1.85
0.59 0.98 1.19
0.75 0.98 1.19
0.20 0.31 0.39
M5 x 0.24 DP M8 x 0.47 DP M10 x 0.63 DP
N/A**
0.51 0.55 0.69
15 30 30
N/A
N/A
M5 M5
0.229 0.225
1.103 1.263
www.vektek.com
800-992-0236
© Vektek, January 2023
Made with FlippingBook - Online magazine maker