Link Clamps and Levers
High Pressure Levers and Self Produced Dimensions
B
A
R Threads
G .0005 -A-
H±.005
J±.005
Q
C
L
E
F TYP
K .0005 .001 A
E
S
D-23
Sq Head Set Screw
Full Radius
N
M .005
E
D .010
T Hex
Dimensions
ILS916001 REV E
Link Clamp Model No.*
Model No.
ABCDEF GHJK LMNQ R ST
Standard Length Lever, 1:1 Ratio 91-6004-01 16-6X04-00 1.75 2.00 0.63 0.500 0.188 0.19 0.1885 0.88 0.13 0.2505 0.44 0.260 0.44 1.25 1/4-20 UNC 0.19 0.433 91-6006-01 16-6X06-00 2.25 2.50 0.88 0.625 0.250 0.25 0.2515 1.13 0.13 0.3755 0.56 0.322 0.56 1.75 5/16-18 UNC0.24 0.495 91-6009-01 16-6X09-00 2.75 3.13 1.25 1.000 0.375 0.38 0.3765 1.38 0.19 0.5005 0.81 0.510 0.81 2.25 3/8-16 UNC 0.28 0.577 91-6014-01 16-6X14-00 3.50 4.00 1.75 1.250 0.500 0.50 0.5015 1.75 0.25 0.6255 1.19 0.635 1.19 3.00 1/2-13 UNC 0.38 0.743 91-6016-01 16-6X16-00 4.25 4.88 2.00 1.500 0.625 0.63 0.6265 2.13 0.25 0.7505 1.50 0.760 1.50 3.50 5/8-11 UNC 0.47 0.930 Extended Length Lever without Tapped Hole, 2:1 Ratio 91-6004-02 16-6X04-00 N/A 2.88 0.63 0.500 0.188 0.19 0.1885 0.88 0.13 0.2505 0.44 0.260 0.44 N/A N/A N/A N/A 91-6006-02 16-6X06-00 N/A 3.63 0.88 0.625 0.250 0.25 0.2515 1.13 0.13 0.3755 0.56 0.322 0.56 N/A N/A N/A N/A 91-6009-02 16-6X09-00 N/A 4.50 1.25 1.000 0.375 0.38 0.3765 1.38 0.19 0.5005 0.81 0.510 0.81 N/A N/A N/A N/A 91-6014-02 16-6X14-00 N/A 5.75 1.75 1.250 0.500 0.50 0.5015 1.75 0.25 0.6255 1.19 0.635 1.19 N/A N/A N/A N/A 91-6016-02 16-6X16-00 N/A 7.00 2.00 1.500 0.625 0.63 0.6265 2.13 0.25 0.7505 1.50 0.760 1.50 N/A N/A N/A N/A
Link Clamp Lever Output Curves NOTE: Modifications to levers that
result in clamp ratios below a 1:1 ratio are not in the safe operating zone for the corresponding link clamp and could result in premature failure.
Exceeding the allowable offset values and operating pressures specified in the tables will result in excessive forces on the link clamp pins, links and rod which could result in premature failure.
© Vektek, July 2024
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker