Special Use Clamps
Edge Clamps
Single Acting Standard And Manifold Mount
Low profile allows you to slab mill over the clamp on most parts. Downward clamping angle of the blade yields both horizontal and vertical force pushing your part firmly against locators and the work surface. Three way porting makes plumbing multiple clamps easy without tees or additional manifolds. Manifold mount design uses O-Ring face seal for simple bolt down installation. Unique center hole mounting and thrust bushing make this device ideal for quick set-up T-slot mounting. Hardened Chrome alloy steel blade grips the part while the unique design angle provides both horizontal and vertical clamp force. Three SAE 4 fluid ports on standard model, O-Ring bolt down face seal on the manifold model simplify leak free installation. BHC™(Black Hard Coating) on the cylinder bodies helps prevent scoring and scratching. Specially designed springs run longer, require less maintenance. Pivot locator/thrust bushing provided. Proprietary seal designs reduce leakage for long lasting cylinders.
E-15
ILS153100 REV E
For proper sealing, mating surface must be flat within 0.003 in. with a maximum 63 µ in. R a surface finish.
Clamp Force (lbs.) *
Approximate Pressure to Extend
Effective Horizontal Stroke
Vertical Blade Movement
Body Size (L x W)
Piston Area (sq. in.)
Oil Capacity (cu. in.)
Model No.
Plumbing Style
Horizontal Vertical
Single Acting (S/A) 15-3108-01 SAE Ported 15-3108-00 Manifold
Cylinders, actuated hydraulically 1 direction, spring returned.
2,000 2,000
500 500
0.20 0.20
0.06 2.88 x 1.62 0.442 0.09 0.06 2.50 x 1.62 0.442 0.09
200 psi 200 psi
* Cylinder capacities are listed at 5,000 psi maximum operating pressure. The output force is adjustable by varying hydraulic system pressure. (Actual force may vary slightly due to friction loss, seal and wiper drag and/or return springs.)
DRILL FOR 5/16 SHCS, C'BORE FOR PIVOT
2.88
DRILL FOR 5/16 SHCS, C'BORE FOR PIVOT
1.53
.19
DRILL AND C'BORE FOR 1/4 SHCS
.09
1.13
1.63
.63
.81
.50
.44
.055
.25
SAE 4 CLAMP PORT
.032 WIDE SERRATIONS ON HARDENED BLADE
.657
PRESSURE CLAMP PORT
.09
FOR MANIFOLD (SEAL PROVIDED)
.25
1.00
.53
15
FEED HOLE .130 .090
.66
.66
.24
X .19 DEEP ALIGNMENT HOLE .265 .005
.623 REMOVABLE PIVOT
.20 STROKE
1.88
REMOVABLE PIVOT .623 .001
1.53
2.50
15-3108-01 SAE 4 PORTED
15-3108-00 MANIFOLD MOUNTED REFER TO 15-3108-01 FOR DIMENSIONS NOT SHOWN
ILS153101 REV E
© Vektek, July 2024
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker