Compact Clamps
A
Cavity Dimensions and Compact Clamp Accessories
B
OPTIONAL PNEUMATIC SENSING CAVITY HOLES* V* MAX
A
B
D
OPTIONAL PNEUMATIC SENSING CAVITY HOLES* V* MAX
C
REAR OF CLAMP
F* (MAX)
D
C
REAR OF CLAMP
4X Mounting Holes (See table for size)
*Feed hole for Pneumatic Sensing can go anywhere on the E* plane within F* of center
F* (MAX)
E*
4X Mounting Holes (See table for size)
*Feed hole for Pneumatic Sensing can go anywhere on the E* plane within F* of center
T 60
2X .125
E*
G .001
CLAMP FEED HOLE J K
T 60
M .003
2X .125
2X 17
G .001
CLAMP FEED HOLE J K
M .003
UNCLAMP FEED HOLE L MIN
E-5
2X 17
P .001
SEE DETAIL A
UNCLAMP FEED HOLE L MIN
H .001
Radius R
Radius S
P .001
F
SEE DETAIL A
Q (MIN)
SCALE 1.000 DETAIL A
H .001
Radius R
Radius S
OPTIONAL OIL FEEDHOLE LOCATION
Dimensions Model No. Q (MIN)
ILS175203 REV C
SCALE 1.000 DETAIL A
Mounting Thread
A B CDE*F*GH J KLM P QRSTV*
OPTIONAL OIL FEEDHOLE LOCATION
ILS175203 REV C
Double Acting (D/A) Cylinders, actuated hydraulically retract and extend 17-5217-XX 1.091 .720 1.050 .525 .730 .275 .937 .875 .360 .022 .898 .380 1.239 .325 .19 .09 1.00 .07 No. 8 (M4) 17-5220-XX 1.260 .850 1.296 .648 .846 .375 1.1251.062 .390 .022 .951 .400 1.399 .350 .25 .13 1.19 .17 No. 12 (M5) 17-5225-XX 1.652 1.076 1.624 .812 1.058 .471 1.4371.312 .440 .047 1.119 .450 1.570 .375 .25 .13 1.52 .23 1/4 (M6) 17-5232-XX 1.534 .899 1.868 .934 1.331 .425 1.7501.625 .440 .047 1.189 .450 1.632 .400 .25 .13 1.81 .29 5/16 (M8)
*DIMENSIONS ONLY APPLY TO 17-52XX-XX-PP MODELS.
LONG ARM
Compact Clamp Arms Available in both short and long versions. Made from alloy steel for ultimate durability Long Arm available for machining to fit your application. Note: Please see tables for max operating pressure and force output when making your own arm or using the long arm. Arm may extend out over front of unit even in fully unclamped position.
SHORT ARM
A
A
H
F
G .001
V
Q
L .001
Y
K
V
.005
Radius AJ
W .001
R
.002
X
Radius P
T
25
S
M
N
SEE IS1776 FOR MORE DIMENSIONS
Dimensions Arm Model No.
ILS175204 REV B
Clamp Model No.
AFGHJKLMNPQRS TVWXY
Short Arm 91-7217-00 17-5217-XX 1.25 30° .310 .549 .027 .364 .061 .390 .900 .192 .661 .193 .682 .200 .827 .199 .175 .163 91-7220-00 17-5220-XX 1.50 25° .399 .685 .037 .529 .082 .515 1.125 .200 .930 .257 .909 .300 1.188 .278 .239 .204 91-7225-00 17-5225-XX 2.00 25° .499 .949 .045 .596 .102 .640 1.500 .270 1.157 .321 1.136 .333 1.472 .314 .302 .257 91-7232-00 17-5232-XX 2.25 25° .598 1.070 .055 .758 .123 .765 1.700 .281 1.411 .385 1.250 .353 1.816 .356 .394 .283 Long Arm 91-7217-05 17-5217-XX 2.50 N/A .310 .549 N/A .364 .061 .390 .900 .192 .661 .193 .682 N/A .797 .199 .175 .163 91-7220-05 17-5220-XX 3.00 N/A .399 .685 N/A .529 .082 .515 1.125 .200 .930 .257 .909 N/A 1.094 .278 .239 .204 91-7225-05 17-5225-XX 3.50 N/A .499 .942 N/A .596 .102 .640 1.500 .270 1.157 .321 1.136 N/A 1.390 .314 .302 .257 91-7232-05 17-5232-XX 4.0 N/A .598 1.070 N/A .758 .123 .765 1.700 .281 1.411 .385 1.250 N/A 1.714 .356 .394 .283
© Vektek, August 2026
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker