Cylinders
Threaded Mini
Single Acting Easy to use, basic hydraulic cylinders in SAE ported styles. A force ranging from “minimal” to maximum cylinder capacity, by adjusting the input pressure. Designed for long life in high production applications. Reduce or eliminate part distortion by providing accurate repeatable clamping force.
Special tough wipers help keep chips and contaminants out on all cylinder sizes.
ILS200100 REV F
Positive piston stop shoulder keeps the spring from “bottoming out” guarding against premature spring failure which can plague other cylinder brands. Available in three stroke lengths for each capacity, up to 1 1/4” stroke.
F-2
Effective Piston Area (sq. in.)
Oil Capacity (cu. in.)**
Cylinder Capacity (lbs.)**
Minimum Length (in.)
Model No.
Stroke (in.)
Body Thread
Extend
Extend
Extend
Single Acting (S/A)
Cylinders, actuated hydraulically 1 direction, spring returned.
20-0104-02 20-0104-07 20-0104-12 20-0105-03 20-0105-07 20-0105-12 20-0108-02 20-0108-07 20-0108-12
0.25 0.75 1.25 0.38 0.75 1.25 0.25 0.75 1.25
1.98 2.63 3.23 2.01 2.63 3.29 2.21 2.71 3.41
0.028 0.083 0.138 0.074 0.147 0.245 0.111 0.332 0.553
550
5/8-18
0.110
980
3/4-16
0.196
2,200
1 1/16-16
0.442
** Cylinder capacities are at 5,000 psi maximum operating pressure. The output force is adjustable by varying hydraulic system pressure. To determine the approximate output force for your application, multiply the piston area by your system operating pressure. (Actual force may vary slightly due to friction loss, seal and wiper drag and/or return springs.)
© Vektek, July 2024
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker